OPERATION
USING CIRCLE CUTTER
See Figure 9.
n Assemble circle cutter if necessary. Refer to “Assembling Circle Cutter” in this manual.
nAttach circle cutter to speed saw if necessary. Refer to “Attaching Circle Cutter” in this manual.
nAdjust depth of cut if necessary. Refer to “Adjusting Depth Of Cut” in this manual.
n Loosen pivot point knob.
n Move pivot point knob to desired diameter dimension. n Tighten pivot point knob.
n Start speed saw.
n Cut a pilot hole in the center of the intended circle. n Line up pivot point knob with the lead hole.
nBegin cut, applying moderate, steady pressure.
n Hold the speed saw firmly with one hand and the handle |
|
with the other. | Fig. 9 |
CAUTION:
Too much force causes heat build up, which can shorten the life of the bit.
nWork in a clockwise direction, continuing back to the starting position.
nStop speed saw.
13