ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Speed Saw with Depth Adjustment Ring
Bits (2)
Collet
Collet Adaptor
Circle Cutter
Wrench
Lanyard (not included in combo)
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
REMOVING DEPTH ADJUSTMENT RING
See Figure 2.
nRemove battery pack from speed saw.
nPlace wrench in tab on depth adjustment ring.
nDepress
nLift depth adjustment ring off tool.
ASSEMBLING CIRCLE CUTTER
See Figure 3.
nRemove battery pack from speed saw.
nAttach handle with screw provided.
nAttach pivot point knob with nut provided.
TAB
WRENCH
Fig. 2
SCREW
NUT
HANDLE | PIVOT POINT |
| |
KNOB | Fig. 3 | ||
|
9