CAUTION

SPIDER ALERT!

SPIDER AND WEBS

INSIDE BURNER TUBE

If you notice that your grill is getting hard to light or that the flame isn’t as strong as it should be, take the time to check and clean the venturi’s.

VALVE

3.

Remove carryover tubes and burners.

4.

Detach electrode from burner.

 

NOTE: Removal/Detachment method will depend on the

 

burner configuration. See different configurations in

 

illustrations below.

5.

Carefully lift each burner up and away from valve openings.

We suggest three ways to clean the burner tubes. Use the one

easiest for you.

 

(A) Bend a stiff wire (a light weight coat hanger works well)

 

into a small hook. Run the hook through each burner

 

tube several times.

 

(B) Use a narrow bottle brush with a flexible handle (do not

 

use a brass wire brush), run the brush through each

 

burner tube several times.

 

(C) Wear eye protection: Use an air hose to force air into

 

the burner tube and out the burner ports. Check each

 

port to make sure air comes out each hole.

6.

Wire brush entire outer surface of burner to remove food

 

residue and dirt.

7.

Clean any blocked ports with a stiff wire such as an open

CONTROL PANEL

SPIDER WEBS

INSIDE VENTURI

paper clip.

8. Check burner for damage, due to normal wear and corrosion

BURNER

some holes may become enlarged. If any large cracks or

holes are found replace burner.

VERY IMPORTANT: Burner tubes must reengage valve

In some areas of the country, spiders or small insects have been known to create “flashback” problems. The spiders spin webs, build nests and lay eggs in the grill’s venturi tube(s) obstructing the flow of gas to the burner. The backed-up gas can ignite in the venturi behind the control panel. This is known as a flashback and it can damage your grill and even cause injury.

openings. See illustrations at right.

9.Attach electrode to burner.

10. Carefully replace burners.

11.Attach burners to brackets on firebox.

12.Reposition carryover tubes and attach to burners. Replace flame tamers and cooking grates.

Correct

burner-to-valve

engagement

To prevent flashbacks and ensure good performance the burner and venturi assembly should be removed from the grill and cleaned before use whenever the grill has been idle for an extended period.

Storing Your Grill

• Clean cooking grates.

• Store in dry location.

• When LP cylinder is connected to grill, store outdoors in a well-

ventilated space and out of reach of children.

• Cover grill if stored outdoors. Choose from a variety of grill

covers offered by manufacturers.

• Store grill indoors ONLY if LP cylinder is turned off and

Remove screws

Firebox

be tu Carryover

Firebox

burner Electrode bracket

disconnected, removed from grill and stored outdoors.

• When removing grill from storage, follow “Cleaning the Burner

Assembly” instructions before starting grill.

Cleaning the Burner Assembly

Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill.

1.Turn gas OFF at control knobs and LP cylinder.

2.Remove cooking grates and flame tamers.

Firebox

tube

Carryover

Firebox burner bracket

Electrode

Pry off electrode with

a flat blade screwdriver

9

Page 9
Image 9
Char-Broil 463257111 Storing Your Grill, Cleaning the Burner Assembly, Very Important Burner tubes must reengage valve

463257111 specifications

The Char-Broil 463257111 is a robust and versatile gas grill that has gained popularity among both novice and experienced grillers. Designed with practicality and ease of use in mind, this grill features a variety of attributes that enhance the grilling experience, making it a worthy addition to any backyard setup.

One of the defining features of this gas grill is its high-quality construction. It boasts a durable stainless steel frame that not only ensures longevity but also provides resistance against rust and corrosion. The grill has a sleek appearance that complements any outdoor decor, though its practical design is just as significant as its aesthetics.

The Char-Broil 463257111 is equipped with four main burners, each providing 10,000 BTUs of heating power. This allows for a total cooking power of 40,000 BTUs, giving users ample heat for grilling various types of meat and vegetables. The burners are outfitted with electronic ignition systems for quick and reliable startups, allowing you to get grilling without the hassle of matches or lighters.

The cooking surface of the Char-Broil 463257111 is generous, providing 425 square inches of primary cooking space, along with an additional 150 square inches of warming rack. This ample cooking area is perfect for hosting gatherings or family barbecues, enabling users to cook enough food for several guests simultaneously.

One standout feature of this grill is its TRU-Infrared cooking technology. This innovative system promotes even heat distribution, ensuring that food cooks uniformly, preventing hotspots that can lead to uneven cooking. The infrared technology not only enhances flavor by sealing in juices, but it also reduces flare-ups, leading to a more controlled cooking environment.

Additionally, the grill features side shelves that offer extra prep space for condiments and tools, while the built-in thermometer allows for precise monitoring of cooking temperatures. This function is crucial for achieving the perfect cook on different types of meat.

Ease of maintenance is another characteristic of the Char-Broil 463257111. The grill is easy to clean, with removable grease trays simplifying the cleanup process after cooking, ensuring that you can spend more time enjoying your meals rather than cleaning.

In conclusion, the Char-Broil 463257111 is an exemplary gas grill that combines quality construction, powerful performance, and innovative technology. Whether you are an ardent grilling enthusiast or a casual cook, this grill provides everything you need for a successful outdoor cooking experience.