OPERATION
TO EXTEND THE SAW TABLE
See Figure 17.
The saw table can be extended to increase the work surface.
To lengthen the saw table:
nLoosen the table lock knob underneath the saw table by
turning counterclockwise.
n Using the extension scale on the saw table, extend the saw table to the desired position.
n Lock the saw table in place by turning the table lock knob clockwise.
USING THE MITER GAUGE
See Figures 18 - 19.
The miter gauge can be turned 60° to the right or left. n Loosen the lock knob on the miter gauge.
n With the miter gauge in the miter gauge slot, rotate the gauge until the desired angle is reached on the index scale.
n Retighten the lock knob.
NOTE: For convenience, store the miter gauge in the slot on the back of the band saw.
EXTENSION
SCALE
SAW |
|
|
TABLE | TABLE |
|
| LOCK |
|
| KNOB | Fig. 17 |
|
|
LOCK
KNOB
MITER
GAUGE
SLOT
MITER
GAUGE
Fig. 18
MITER
GAUGE
SLOT
Fig. 19
Page 19