Graco Inc 220240, Series E, 221076, 307760 manual Accessories

Page 18

ACCESSORIES

Must be purchased separately.

CAUTION

To avoid premature wear of the pressure switch, never use more than 7.6 m (25 ft) of 6 mm (1/4 in.) ID outlet hose. When longer outlet hose is needed use 9 mm (3/8 in.) ID hose at a maximum of 30 m (100 ft) long. Never use 6 mm (1/4 in.) ID and 9 mm (3/8 in.) ID hose together.

Do not use lacquer or lacquer thinner in the suction and outlet hoses supplied with this system. These fluids quickly destroy the hose material. Use the op- tional chemical±resistant hoses.

CHEMICAL±RESISTANT SUCTlON & OUTLET HOSES

For use with lacquer and lacquer thinners.

205±142 Outlet Hose; Nylon; 9 mm (3/8º) ID; cpld

3/8 npsm(fbe); 7.6 m (25');

21 bar (300psi) MAXIMUM WORKING PRESSURE

219±095 Suction Hose; Nylon

LARGER DIAMETER OUTLET HOSE

Use this hose when using more than 7.6 m (25 ft) of outlet hose. Not intended for use with lacquer or lacquer thinners.

220±009 Outlet Hose; 9 mm (3/8º) ID; cpld 3/8 npsm(fbe); 15 m (50'); 17.5 bar (250 psi)

MAXIMUM WORKING PRESSURE

NlPPLE 108±228

Needed to couple two lengths of hose 220±009. 3/8 npsm(mbe)

ADAPTER FITTING 220±265

5000 psi (350 bar) MAXIMUM WORKING PRESSURE

Couples roller frame directly to roller valve.

3 INCH ROLLER FRAME & DlFFUSER 220±234 Same as 9 in. version but shorter. (See page 16) Must order cover separately.

3 INCH ROLLER COVER

108±402 1/2 in. (12 mm) nap, for semi±rough to smooth surfaces.

9 INCH ROLLER COVERS

107±590 12 mm (1/2 in.) nap, for semi±rough to smooth surfaces

107±591 19 mm (3/4 in.) nap, for semi±rough sur- faces

107±592 32 mm (1±1/4 in.) nap, for rough surfaces

ADJUSTABLE EXTENSION TUBES

218±775 0.45±0.9 m (18±36 in.)

218±776 0.9±1.8 m (3±6 ft)

218±777 1.8±3.7 m (6±12 ft)

218±778 2.4±4.8 m (8±16 ft)

SPRAY WAND

220±236

4050 psi (260 bar) MAXIMUM WORKING PRESSURE

Creates soft spray when used with the PT2000.

TWO ACCESSORY ADAPTER 220±232

1000 psi (70 bar) MAXIMUM WORKING PRESSURE Adapts pump outlet of PT2000 to use two accessory applicators simultaneously.

FLUSH ADAPTER

220±231

Allows you to use the city water supply to quickly flush the PT2000.

18307±760

Image 18
Contents 50 Hz, 220/240 Volts, 0.5 Amp Bar 250 psi Maximum Working PressureTable of Contents TermsPT2000 Pressure Roller System Description Setup Startup OperationMaintenance Flushing Latex Paint OnlyFlushing Oil±based Paint Only Installing and Removing a Roller Cover See Fig Cleaning the Roller Diffuser See FigTroubleshooting Guide Pressure Relief ProcedureRepair Fuse See Fig ON/OFF Switch SeePower Supply Cord See Fig Rectifier See FigPressure Switch See , 12 Outlet Valve See FigInlet Valve See Fig 12 307±760 Diaphragm See FigPriming Valve & Tube See Fig Suction Tube See FigConnecting Rod and Bearing See Fig Motor See FigModel 220±240, Series E Parts DrawingModel 221±076, Series E See Detail a 14 307±760Pressure Roller System Parts ListWiring Schematic Model 220±240, Series E Complete SystemRef No Roller Frame Roller Valve Repair KIT 218±96016 307±760 Pump Housing Parts Dispensing AccessoriesDetail a Accessories Service Information Assembly Part Name Changed StatusTechnical Data Graco Warranty and Disclaimers