SECTION 3: OPERATIONS
Operation Safety |
| Basic Controls |
|
|
|
|
|
|
Damage to your eyes, hands and feet could result from using this machine without prop- er protective gear. Always wear safety glass- es, leather gloves, and steel toe footwear when operating this machine.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
G5771 50" Slip Roll 16 Gauge
Use the descriptions and figures below to become familiar with the basic controls of your slip roll.
Thickness Adjust Knob: Raises and lowers the lower roller to adjust for thicknesses of different workpieces.
Radius Adjust Knob: Raises and lowers the rear roller to create smaller and larger radius bends.
Thickness Adjust Knob
Radius Adjust Knob 
Figure 10. Adjustment knobs.
Removable Bushing: Slides out to allow removal of the upper roller to facilitate the unloading of cylindrical workpieces.
Crank: Turns the rollers, feeding the workpiece through the machine.
Removable Bushing
Crank