5.2Getting to Know Your SG-7 Sync Transcoder
The KRAMER
Front/Rear panel features of the
NOTE
For operation instructions refer to section 9.
Figure 4: SG-7 Front/Rear Panel Features
Table 3:
No. | Feature | Function |
|
|
|
1. | Power switch | Illuminated switch: Supplies power to the unit. |
2. | C sync In BNC connector | Composite sync input. |
3. |
| Selects “75ohm“ or |
|
| looping select |
4. | Loop BNC connector | Provides looping capability of the composite sync input. |
5. | Vs Out BNC connector | Vertical sync output. |
6. | Hs Out BNC connector | Horizontal sync output. |
7. | TTL Vs In BNC connector | TTL level vertical sync input. |
8. | TTL Hs In BNC connector | TTL level horizontal sync input. |
9. | CS Out BNC connector | Composite sync output. |
10. | Hs In BNC connector | Horizontal sync input. |
11. | Loop BNC connector | Provides looping capability of the "H" input. |
12. | Vs In BNC connector | Vertical sync input. |
13. | Loop BNC connector | Provides looping capability of the "V" input. |
14. | CS Out 1, 2 BNC connector | Composite sync outputs. |
15. | Power Connector | A |
|
| unit. Directly underneath this connector, a fuse holder houses the |
|
| appropriate fuse. |
|
|
|
Kramer Electronics Ltd.
8