Sync Tip switch

5.4Getting to Know Your SG-11 Sync to Green Adder/Stripper

The KRAMER SG-11Sync to Green Adder/Stripper interfaces between the two most widely used professional Component Video formats - RGB with Sync On Green and RGBS. In many video studios and production centers there is a need to convert from one format to the other and the KRAMER SG-11is the perfect choice - as it operates simultaneously in both directions.

Front/Rear panel features of the SG-11are described in Figure 6 and Table 5.

NOTE

For operation instructions refer to section 9.

Figure 6: SG-11 Front/Rear Panel Features

Table 5: SG-11 Front/Rear Panel Features

No.	Feature	Function

1.	Power switch	Illuminated switch: Supplies power to the unit.
2.	Green in BNC connector	Green signal input.
3.	Sync in BNC connector	Sync signal input.
4.	G+S out BNC connector	Combined Green + Sync output.
5.	G+S in BNC connector	Combined Green + Sync input.
6.	Green out BNC connector	Separated Green output.
7.	Sync out BNC connector	Separated Sync output.
8.	Sync Tip switch	Selects either clamping the signal to a predefined -1VDC level or to
		0VDC level.
9.	Power Connector	A 3-prong AC Connector allows power to be supplied to the unit.
		Directly underneath this connector, a fuse holder houses the
		appropriate fuse.

Kramer Electronics Ltd.

Kramer Electronics SG-6 Getting to Know Your SG-11 Sync to Green Adder/Stripper, Sync Tip switch

5.4Getting to Know Your SG-11 Sync to Green Adder/Stripper

Figure 6: SG-11 Front/Rear Panel Features

Function