Harbor Freight Tools 45689 operating instructions Spot Welder

Page 1

Spot Welder

Model 45689

Set up and Operating Instructions

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Manual Revised 10g

Image 1
Contents Spot Welder Save this Manual General Safety Warnings and PrecautionsSpecific Product Warnings and Precautions Figures A, B, E, and Assy. Diagram Unpacking Assembly InstructionsTo Attach The Upper And Lower Tongs To Attach The Handle To The Spot Welder Retighten the four Cap Screws parts #3, #11To Attach Tong Tips To The Spot Welder Figure COperating Instructions To Adjust The Tong And Operating Lever PressureTo Use The Operating Lever To Use The Power SwitchFor technical questions, please call Please Read the Following Carefully Parts List Assembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 1 Year / 90 day warranty