SECTION 3 – OPERATION
3-1. Controls
1 | 2 |
| |
5 | 3 |
|
4
7 | 8 | 6 |
1Wire Speed Meter (Optional)
2Voltage Meter (Optional)
Use meter to set and display rate of wire speed in inches per minute (ipm).
3Power Control Switch
4Wire Speed Range Switch
5Wire Speed Control
Use switch to select high or low wire speed range. High range is 100 to 700 ipm. Low range is 50 to 350 ipm.
Use control to adjust wire speed within range selected by switch.
6 Purge Switch (Optional)
Press switch to momentarily ener- gize gas solenoid and purge air from gun, and to adjust shielding gas regulator.
7 CC/CV Switch
Use switch to match wire feeder with welding power source output.
8 Rating Label Location
Ref.