Carrier 50LJQ008, 012 Unit STD. Unit Economizer Corner, ``H ``J, Weight ``B, Weight ``D 50LJQ

UNIT	STD. UNIT		ECONOMIZER		CORNER		CORNER		CORNER		CORNER		``H''		``J''		``K''
	WEIGHT		WEIGHT		WEIGHT ``A''		WEIGHT ``B''		WEIGHT ``C''		WEIGHT ``D''
50LJQ
	Lb	Kg	Lb	Kg	Lb	Kg	Lb	Kg	Lb	Kg	Lb	Kg	Ft-in.	mm	Ft-in.	mm	Ft-in.	mm
008	840	381	44	20	182	83	156	71	231	105	271	123	2-07¤8	632	3-55¤16	1050	2-911¤16	856
012	940	426	44	20	204	93	174	79	259	117	303	137	1-27¤8	378	4-15¤16	1253	3-03¤8	924

			CONNECTION SIZES
A	13¤8		dia [35] ®eld power supply hole
B	21¤2		dia [64] power supply knockout
C	13¤4		dia [44] charging-port hole
D	7¤8		dia [22] ®eld control wiring hole
E	3¤4	-14 NPT condensate drain
F	2	dia [51] power supply knockout

NOTES:

1.Dimensions in [ ] are in millimeters.

2. Center of gravity.

3. Direction of air¯ow.

4.Ductwork to be attached to accessory roof curb only.

5.Minimum clearance (local codes or jurisdiction may prevail):

a.Bottom to combustible surfaces (when not using curb) 25 mm (one in.).

b.Condenser coil, for proper air¯ow, 914 mm (36 in.) one side, 305 mm (12 in.) the other. The side getting the greater clear- ance is optional.

c.Overhead 1524 mm (60 in.) to assure proper outdoor fan operation.

d.Between units, control box side, 1067 mm (42 in.).

e.Between unit and ungrounded surfaces, control box side, 914 mm (36 in.).

f.Between unit and block or concrete walls and other grounded surfaces, control box side 1067 mm (42 in.).

g.Horizontal supply and return end, zero mm (zero in.).

6.With the exception of the clearance for the outdoor coil as stated in notes 5b and c, a removable fence or barricade requires no clearance.

Fig. 5 Ð Base Unit Dimensions

6