Bernard SPEC JL-1.3 manual Jump Liners, MIG Welding Accessory, Bernard

Jump Liners

MIG Welding Accessory

Patented Jump Liner

Issued August 2007 • Index No. SPEC JL-1.3

All Consumables are Not

Created Equal.

It's important to choose longer lasting consumables. They can make the difference between repeated consumable replacement and rework, or more arc time and better bottom line.

Patented Jump Liners replace only the most commonly worn and clogged liner area to reduce the amount of time a gun is offline and minimize inventory.

Enable quick and easy neck change-out so gun can be easily adapted to fit multiple applications.

Proprietary in-house coiling process and unique composition eliminates flat spots or sharp edges inside Jump Liners to improve wire feed performance.

Fit all Q-Guns™ and S-Guns™ - from 150 to 600 Amps.

Available in sizes to fit .023" (0.6 mm) to 1/16" (1.6 mm) wire.

Made with USA

Pride and without

Compromise in the

Bernard®

An Illinois Tool Works Company	Phone: 800-946-2281 (US Only) 708-946-2281 (Outside US)
449 West Corning Road, Box 667	Fax: 708-946-6726
Beecher, Illinois 60401 USA	For more information, visit us at BernardWelds.com