3.Avoid eye and body damage. Welding rays and infrared radiation can injure eyes and burn skin. Wear
4.Know proper welding practices. Read and understand the manufacturer’s instructions, as well as your employer’s safety practices for welding.
5.Connect only to a code approved power source. Connect only to a grounding power source conforming to the National Electrical Code and Local Codes.
6.Avoid fire and explosion. Remove flammable and explosive material from at least 35 feet from the welding site to prevent welding sparks or molten metal from starting a fire. Keep a type ABC fire extinguisher within easy reach. Thoroughly clean the object being welded of any paint, grease, or other foreign material.
7.Avoid being burned. Always wear
Unpacking
When unpacking, check to make sure the following parts are included.
Torch (1)
Power Cord
Ground Cable
Wire Spool and Spare
Welding Tip not shown
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Assembly
1.Attach the Handle (30) to the Cover (31) using screw (29) inserted from the Handle top- rear. Refer to the photo at the top of page 6, and the Assembly Drawing on page 10.
2.Attach the Cover Locking Spring (8) to the front of the Base Frame (14) using the supplied
SKU 54878 | For technical questions, please call | Page |