Chicago Electric 91814 operating instructions Proper Cutting Technique

Page 14

Proper Cutting Technique

14.To cut efficiently, the following steps must be carefully followed:

√Lightly touch the Tip to the cutting surface.

√Contact with the work surface must be maintained or the unit will shut off. If contact is lost with the cutting surface, the arc will stop within two seconds. Squeeze the Trigger once and release before attempting to restart the arc.

√Slowly move the Torch handle at a slight angle along the cutting line with the Torch tip trailing.

√Cut 4 minutes*, then shut the welder off for at least 6 minutes* to allow it to cool properly, or else the welder will overheat, possibly damaging itself.

*Times based on highest amp setting. For other amp settings, see Duration of Use, previous page.

√If the unit stops and the Red Overheat Indicator (4) lights:

Turn the power switch to OFF.

Allow the unit to cool completely (at least 15 minutes).

Turn the cutter back ON and continue cutting.

To prevent this, reduce the welding time between rest periods and ensure proper ventilation.

√If proper cutting is not achieved, adjust the current and/or air flow. The air causes the molten metal to fall away from the workpiece being cut. To adjust the current or air flow, press the Power Switch (7) to the Off (O) position, then adjust the current and/or air pressure.The air will continue to come out of the Torch handle for 30 seconds once the trigger is released. Repeat steps 9 through 12 again.

15.When finished cutting:

A. Release the Torch handle trigger and lift the Torch handle from the workpiece, B. Press the Power Switch to the Off (O) position,

C. Set the Torch handle down on the metal workbench, D. Turn the air supply off,

E. Unplug the line cord plug from the electrical outlet.

 

SKU 91814

For technical questions, please call 1-800-444-3353;

PAGE 14

Troubleshooting section at end of manual.

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 91814 Contents Work Area SpecificationsSave This Manual Electrical Safety Personal SafetyService Tool Use and CareSpecific Safety Rules Inhalation Hazard Welding Produces toxic fumes and gassesPage Grounding Extension CordsSymbology Rear View Setup Duration of Use Duty Cycle Cutting√ If the unit stops and the Red Overheat Indicator 4 lights Proper Cutting TechniqueTorch inspection and assembly Circuit Diagram Please Read the Following CarefullyDiagram below Not Shown Fan Runs when switched on but Arc will not ignite Troubleshooting Arc ignites for several seconds but then goes outCut goes only partially through the workpiece Fast Nozzle Wear Excessive Slag formation

91814 specifications

The Chicago Electric 91814 is a popular choice among woodworking enthusiasts and professionals alike, thanks to its robust features and reliable performance. As a compact router, it is designed to meet diverse routing needs, ranging from edge trimming to intricate designs and decorative work on various materials.

One of the standout features of the Chicago Electric 91814 is its powerful 1.5 horsepower motor, which provides ample strength to tackle various routing tasks with ease. This motor enables the router to maintain consistent speed under load, ensuring smooth and precise cuts. Users will appreciate the router's variable speed control, which allows for adjustments between 8,000 to 30,000 RPM. This versatility makes it suitable for different applications and materials, from softwoods to hardwoods and even MDF.

The ergonomic design of the Chicago Electric 91814 contributes to its user-friendly operation. It features a comfortable grip and a lightweight build, which reduces fatigue during extended use. The clear base plate is another practical attribute that affords excellent visibility, enabling users to see their workpiece clearly while routing. This transparency helps in precision and accuracy, allowing for intricate patterns and designs.

Another noteworthy characteristic of this router is its dual-speed operation. The ability to switch between speeds improves versatility, allowing for more efficient routing across various materials. Additionally, the router is equipped with a sturdy plunge base, which facilitates depth adjustments and provides better control, especially for more detailed work.

The Chicago Electric 91814 also supports various bit sizes, making it adaptable to a wide range of cutting tasks. It is compatible with both standard and specialty router bits, expanding its usability. Additionally, the inclusion of a dust collection feature helps keep the workspace clean, reducing clutter and improving visibility.

Overall, the Chicago Electric 91814 combines power, precision, and ease of use, making it a reliable addition to any workshop. Whether you are a hobbyist or a professional woodworker, this router offers the features and technologies necessary to elevate your craftsmanship. Its performance, versatility, and ergonomic design ensure that you can complete projects with confidence and efficiency.
Top Page Image Contents