Chicago Electric 92496 operating instructions See Figure L, See Figures E, and L

9.To determine the proper Acetylene Regulator (parts 1-19) pressure and Oxygen Regulator (parts A1-A20E) pressure for neutral flame adjusting, refer to Figures I, and K.

HIGH PRESSURE LEVER	OXYGEN CONTROL VALVE
(C20)	(B8 with OX Label (B9))

PRE-HEAT OXYGEN CONTROL VALVE
CUTTING	(C26)
		ACETYLENE CONTROL VALVE
NOZZLE	FIGURE L
(D6)		(B8 with AC Label (B10))

10.Depending on use, attach either a Cutting Nozzle #1 (D6), or Welding Nozzle #2 (D4) to the Cutting Attachment (parts C1-C27).

(See Figure L.)

11.Open the Oxygen Control Valve (B8 with label (B9)) on the Torch Handle. Open the Pre-Heat Oxygen Valve (C26) on the Cutting Attachment. Adjust the Oxygen Regulator (parts A1-A20E) to the desired working pressure. Then, close the Oxygen Control Valve on the Torch Handle. (See Figures E, and L.)

12.Open the Acetylene Control Valve (B8 with label (B10)) on the Torch Handle. Adjust the Acetylene Regulator (parts 1-19) to the desired working pressure. Then, close the Acetylene Control Valve on the Torch Handle.

(See Figures E, and L.)

13.Hold the Torch Handle (parts B1-B10) in one hand and the Flint Lighter (D9) in the other hand. (See Figure M.)

FIGURE M

ACETYLENE

CONTROL

VALVE

FLINT LIGHTER (D9) (B8 with AC Label (B10))

SKU 92496 PAGE 12