Chicago Electric 92496 Unpacking, Assembly and Operating Instructions, See Figure E, next

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts Lists on pages 15-19 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

ASSEMBLY AND OPERATING INSTRUCTIONS

For additional information regarding the parts listed in the following pages, refer to the Parts Diagrams on pages 15-19.

1.NOTE! The following instructions are for acetylene gas use only. Contact your gas supplier for instructions on the use of other fuel gases.

2.Make sure to secure the cylinders (as noted in the Specific Safety Rules section).

3.While standing to one side, “crack” each cylinder valve. “Cracking” is to quickly open and close the valve, allowing gas to escape and clearing the valve of any

foreign material.			WARNING!	If oil or grease is found, discontinue using
cylinder and immediately contact				your supplier. (See Figure D.)
		QUICKLY			CYLINDER
	OPEN/CLOSE					VALVE
		VALVE TO			HANDLE
		“CRACK”

ACETYLENE

OR

OXYGEN

CYLINDER

(NOT INCLUDED)

FIGURE D

4.Attach the GREEN Oxygen Regulator (parts A1-A20E) to the oxygen cylinder. Then, attach the RED Acetylene Regulator (parts 1-19) to the acetylene cylinder. Make sure they are tightened in the correct directions (normally, clockwise for oxygen and counterclockwise for acetylene.)

(See Figure E, next page.)

SKU 92496 PAGE 8