Chicago Electric 94739 operating instructions Unpacking, Assembly

Page 9

Unpacking

When unpacking, check to make sure that the product is intact and undamaged.

Included Components and Accessories:

Welding Unit

Electrode with Magnet / Shrinking Electrode

Puller Assembly

(2) Pot Hooks

(50) Washers

(3) Carbon Electrodes

(2) Spare Fuses

If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.

Assembly

1.A 230 V plug (not included) must be installed on the Power Cord before use by a qualified technician.

Caution: Be sure the plug and Power supply are appropriate for this tool. Circuit must be at least 60 Amps.

 

 

REV 06l

SKU 94739

For technical questions, please call 1-800-444-3353

Page 9

Image 9
Contents Auto Body Stud Welding Kit 94739 General Safety Warnings and Precautions SpecificationsWork Area Safety Electrical SafetyTool Use and Care Personal SafetySpecific Safety Rules ServiceFor technical questions, please call For technical questions, please call Grounding Grounded Tools Tools with Three Prong Plugs Symbology Unpacking AssemblyInstalling the Welding Tip Control PanelDuty Cycle Preparing to use the welder Spot Welding Washers using the Magnetic Washer TipAbout Spot Welding Using the Extractor HookUsing the Shrinking Electrode Using the Carbon ElectrodesMaintenance and Troubleshooting Problem Possible Cause Possible Solution Main Wire Connection Circuit Diagram Welder AccessoriesPart Description Parts ListAssembly Photo Please Read the Following Carefully Limited 1 Year / 90 day warranty