Chicago Electric 94739 operating instructions Service, Specific Safety Rules

Page 4

Service

1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspec- tion, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to fol- low maintenance instructions may create a risk of electric shock or injury.

3.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Specific Safety Rules

1.Ground this product. This Welder requires the attachment and use of a UL listed, 230 volt, grounded, 3-prong, electrical Power Cord Plug (not included). Only a qualified electrician should install the Power Cord Plug. Never remove the grounding prong or modify the Power Cord Plug in any way. Do not use adapter plugs with this product. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, this product should only be connected to a 230 volt, 3-hole outlet that is properly grounded and protected by a Ground Fault Circuit Interrupter (GFCI).

2.Industrial applications must follow OSHA guidelines.

3.Have a designated safe place to set down the welding gun which is not flammable, will protect the gun from being bumped or dropped and will not conduct electricity.

4.Never leave the welder unattended when it is plugged into an electrical outlet. Turn off the welder, and unplug it from its electrical outlet before leaving.

5.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

SKU 94739

For technical questions, please call 1-800-444-3353

Page 4

Image 4
Contents Auto Body Stud Welding Kit 94739 Specifications General Safety Warnings and PrecautionsWork Area Safety Electrical SafetyPersonal Safety Tool Use and CareService Specific Safety RulesFor technical questions, please call For technical questions, please call Grounding Grounded Tools Tools with Three Prong Plugs Symbology Assembly UnpackingControl Panel Installing the Welding TipDuty Cycle Spot Welding Washers using the Magnetic Washer Tip Preparing to use the welderUsing the Extractor Hook About Spot WeldingUsing the Carbon Electrodes Using the Shrinking ElectrodeMaintenance and Troubleshooting Problem Possible Cause Possible Solution Welder Accessories Main Wire Connection Circuit DiagramParts List Part DescriptionAssembly Photo Please Read the Following Carefully Limited 1 Year / 90 day warranty