RuggedCom RS400 manual Alarm, PSStatusCmd, Read Data from device using PortCmd

Appendix E – ModBus Management Support and Memory Map

Read Data from device using PortCmd:

E.g. A Modbus Request to read multiple registers from location – 0x03FE

0x04 0x03 0xFE 0x00 0x02

Response would depend on the device as on how many ports are available on the device E.g. If Max number of ports on RuggedCom device to which you are talking to is 20 Response may look like:

0x04 0x04 0xF2 0x76 0x00 0x05

In the above response Byte 3 and 4 refer to Register 1 i.e register at location 0X03FE indicating port status of ports 1 –16 and Byte 5 and 6 representing register 2 at location 0x03FF would refer to port status from 17-32, though in this case since device has only 20 ports so byte 6 would contain the status for ports 17-20 starting from right to left. Rest of the bits in register 2 corresponding to non-existing ports would be zero.

Performing write actions on the device using PortCmd:

Write multiple register request to clear Ethernet port statistics

0x10 0x00 0x83 0x00 0x01 2 0x55 0x76 0x00 0x50

Bit value 1 implies clear Ethernet statistics on a corresponding port. Bit value 0 corresponding to a port means do nothing.

Response may look like:

0x10

0x00 0x81 0x00 0x02

Alarm

This format is also another form of text description. This text corresponds to the alarm description from the table holding all the alarms. Similar to the ‘Text ’ format this format would also have ASCII representation of alarms. Please note that alarms are stacked in RuggedCom device in the sequence of their occurrences. So first alarm on the stack would be Alarm1, next latched alarm in the device is Alarm 2 and so on. User has capability of seeing first 8 alarms from the stack if they exist. Zero value is sent if an alarm does not exist.

PSStatusCmd

Descriptive bit layout for providing the status of available power supplies in the unit. Bits 0-4 of lower byte of the register are used for this purpose.

Bits 0-1: Power Supply 1 Status

Bits 2-3: Power supply 2 Status

Rest of the bits in the register do not provide any system status info at this time Interpretation of the values:

01:Power Supply not present (1)

10:Power Supply is functional (2)

11:Power Supply is not functional (3)

ROS™ v3.5 272 RS400