Parker Products WCS-SIF-01 manual Pneumatic System with Low Impact and Rapid Approach Control

Page 6

WCS-SIF-01

Training & Maintenance Manual

Specifications

Pneumatic System with Low Impact and Rapid Approach Control

Description

Pneumatic valve block for use with pneumatic weld gun cylinders. The block has an integrated low impact system and is provided with two solenoid operated “Namur” or ISO size 2 valves. One valve for the retract (pre-stroke) and one for the weld stroke. The valves can be of the single solenoid type or the double solenoid type. The block is available for different constructions of cylinders:

DH / WH = 3 Ported Cylinders

DP / WP = 2 and 4 Ported Cylinders

Ordering Code: See pages 7 – 13.

Dimensions: See pages 15 – 18.

Applications

The Spotwelding System can be used with any Pneumatic Spot Weld Cylinder.

Mounting

The weld block can either be mounted on the side of the robot or directly to the cylinder. See pages 10 – 12 for bolt hole patterns for robot mount. Consult Parker for cylinder mount application.

Technical Data

Medium

Compressed air, filtered to

 

40µ and dried to a dewpoint

 

of 37°F (3°C), lubricated

 

or non-lubricated. Once

 

lubricated air is applied, this

 

must be maintained.

Working Pressure

37 to 145 PSIG (2.5 to 10 bar)

WH Series Air Operated

 

Quick Exhaust

40 to 115 PSIG (2.7 to 7.9 bar)

Ambient Temperature

41°F to 120°F (5°C to 49°C)

Weight –

 

 

DP

12.0 lbs (5.4 kgs)

DH

7.0 lbs (3.2 kgs)

WP (with Baseplate)

14.0 lbs (6.4 kgs)

WH (with Baseplate)

18.0 lbs (8.2 kgs)

Pneumatic Valve

 

 

24 VDC

 

 

Operating Voltage Solenoids

24 VDC +10/-15%

Power Consumption

4.8W

Class of Protection

IP65 (with plug

 

 

mounted)

Connector

M12, 22mm, 30mm,

 

 

Auto (ISO 2 only)

120 VAC

 

 

Operating Voltage Solenoids....

120 VAC +10/-15%

Frequency

50 / 60 Hz

Power Consumption

7.8 VA / 6.3 VA

Class of Protection

IP65 (with plug

 

 

mounted)

Connector

M12, 22mm, 30mm,

 

Auto (WP / WH only)

Proximity Sensor

 

 

24 VDC

 

 

Supply Voltage

10 to 30 VDC

Rated Operational Current

200mA

Degree of Protection

IP67

Ambient Temperature Range

........ -13°F to 158°F

 

 

(-25°C to 70°C)

Switching Indication

By LED (Yellow)

Output

PNP or NPN

120 VDC (Consult factory for availability)

Supply Voltage

20 to 140 VAC

Frequency

50 or 60 Hz

Supply Voltage Indication

By LED (Green)

Rated Operational Current

400 mA

Degree of Protection

IP67

Ambient Temperature Range

....... -13°F to 158°F

 

 

(-25°C - +70°C)

Switching Indication

By LED (Orange)

Service Kits: See page 9.

Pneumatic

Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.com/pneumatics

Image 6
Contents WCS-SIF-01 Front View General Operation Spotwelding Units 3 ported gunsAnsi 3 Ported Cylinder Option Back ViewAnsi 2 Ported Cylinder Option Ansi 4 Ported Cylinder Option Proportional / quick dump valve that sensesInstalling Weld Block with Existing Equipment Installing Weld Block on New EquipmentWiring Ported Installation How to Set the Feedback Sensor Properly Installation & Setup InstructionsHow to Set the Flow Control Properly Open ClosePneumatic System with Low Impact and Rapid Approach Control Model Selection Examples Model Number Index B6 Namur Valves 3 Ported GunsSeries VoltageWP ISO Retract ValveNPT Bspp000 Model Number Index 5599-1 Auto SizeModel Number Index 5599-2 Size Subbase Kits Manifold Kits Ordering Information Manifold and Subbase Kit Ordering CodeExample How To Order Add-A-Fold AssembliesAdd-A-Fold Assembly Model Number Bspp G Number StationsOrdering Information Model Number Index Generation Components Replacement Components ISO 2 Weld Block Exploded ViewB6 Series Dimensions DH Series 3 Ported Guns Dimensions DP Series 2 and 4 Ported Guns Dimensions145 .75 Inches 16.31 19.3 WP ISO Size 2 Manifold Mountable Weld Block Troubleshooting Cylinder does not extend / retractOffer of Sale Parker Hannifin Corporation