Collection Bag |
|
Components and Hardware Needed: | QTY |
Clear Collection Bag | 1 |
Lower Bag Clamp | 1 |
Wide Foam Strip | 1 |
To install the collection bag: |
|
1.Secure the wide foam strip around the out- side bottom rim of the collector and trim the excess (Figure 12).
Wide Foam Strip
Figure 12. Installed and trimmed wide foam
strip.
2.Slide the clear collection bag around the bottom of the collector so the rim of the bag overlaps onto the foam strip.
3.Tighten the lower bag clamp around the wide foam strip to seal and secure the lower col- lection bag (Figure 13).
Figure 13. Dust collection bag installed.
G0583 1 HP Canister Dust Collector |