Site Considerations
Floor Load
Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some residential floors may require additional reinforcement to support both the machine and operator.
Placement Location
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figure 5 for the minimum working clearances.
30" |
33" |
Figure 5. Minimum working clearances.
Children and visitors may be seriously injured if unsuper- vised around this machine. Lock entrances to the shop or disable start switch or power connection to prevent unsupervised use.
Model G0583Z (Mfg. 3/09+)
G0583Z Assembly
To assemble your dust collector:
1.Install the casters on to the base with (4) 5⁄16⁜18 acorn nuts, as shown in Figure 6. The swivel casters can be mounted in the front or rear position, depending on your preference.
x 4
Figure 6. Caster installed onto the base.
2.Place the round and rectangle supports on the base and secure them with (6) 5⁄16"-18 x 1⁄2" hex bolts (see Figure 7).
x 6 |
Rectangle |
Supports |
Round Support |