Multi Tech Equipment MA30120 quick start Network Setup

Page 13

Connecting & Starting the MultiAccess

MultiAccess Quick Start Guide

 

 

Network Setup

In the Network Setup > Interface you can define a host name for your MultiAccess, change the Ethernet 1 (eth0) to your local IP and subnet mask for your local network, and change the IP address of the default Gateway to your local gateway address.

1.Enter the Host name you have established for your local MultiAccess. Click Save.

2.Enter in the External Name server window the IP address of your domain name server (DNS).

3.Click the Add button to connect to your name server.

4.Change the default IP Address for the Network Card 1 to the IP address of your local network and change the default Subnet Mask for the Network Card 1 to the subnet mask for your local network. Click Save.

5.Change your web browser address to the new address of your local network.

6.Change the Default Gateway IP address to the IP address of your gateway. Click Save.

Note: The options for Network Card 2 are not shown in the above screen due to space limitations. The options are the same as for Network Card 1.

10

Multi-Tech Systems, Inc. PN 82001423L

Image 13
Contents MA30120 Quick Start Guide Contents WAN Communications Remote AccessManagement About This ManualShip Kit Contents Safety Recommendations for Rack InstallationsFront Panel LED Descriptions Front PanelSite Planning InstallationCabling Procedure Back Panel Hardware InstallationLogin Starting Your MultiAccessPage Options Under Each Menu Navigating Through the ScreensSetup Your Time Zone Network Setup Line Interfaces Modem Usage Modem SetupPage Click on the Save button Modem Setup Fax Setup Outbound Fax Client Data Base Radius Client User AuthenticationPage Radius Server General Setup Radius Server User Setup Multi-Tech Software License Agreement Multi-Tech Systems, Inc. End User License Agreement EulaGNU General Public License License Agreements MultiAccess Quick Start Guide No Warranty 82001423L