Multi Tech Equipment MA30120 quick start User Authentication, Radius Client

Page 21

Connecting & Starting the MultiAccess

MultiAccess Quick Start Guide

 

 

User Authentication

To determine User Authentication you must define how the Radius Client is going to be used, that is, are you using an external Radius Server on your network or are you going to use the Radius Server in the MultiAccess. The Radius Client can point to either an external Radius Server or the Radius Server within the MultiAccess.

Note: When using the internal Radius Server, you must use the IP address of network card 1 (eth0).

Radius Client

1.Choose User Authentication >Radius Client.

2.Click on Line Interface and select the Line number you selected up in the Line Interface screen.

3.You can choose an Authentication Type, but Multi-Tech recommends leaving the Authentication Type at the default radius.

4.We recommend that you leave Allow Local Logins set to the default of no.

18

Multi-Tech Systems, Inc. PN 82001423L

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MA30120 Quick Start Guide Contents WAN Communications Remote AccessManagement About This ManualShip Kit Contents Safety Recommendations for Rack InstallationsFront Panel LED Descriptions Front PanelSite Planning InstallationCabling Procedure Back Panel Hardware InstallationLogin Starting Your MultiAccessPage Options Under Each Menu Navigating Through the ScreensSetup Your Time Zone Network Setup Line Interfaces Modem Usage Modem SetupPage Click on the Save button Modem Setup Fax Setup Outbound Fax Client Data Base Radius Client User AuthenticationPage Radius Server General Setup Radius Server User Setup Multi-Tech Software License Agreement Multi-Tech Systems, Inc. End User License Agreement EulaGNU General Public License License Agreements MultiAccess Quick Start Guide No Warranty 82001423L
Top Page Image Contents