Multi Tech Equipment MA30120 quick start Radius Server User Setup

Page 24

MultiAccess Quick Start Guide

Connecting & Starting the MultiAccess

 

 

Radius Server > User Setup

The User Setup screen establishes who the remote access user is. A user name and password has to be enterred for each remote user that is dialing in to the MultiAccess. The User name and password of the remote user is all that is needed initially. If you check or enable Service Type through IP Address windows you will over ride the Default User Setup.

1.Enter the remote user’s name in the Username window.

2.Enter the password of the remote user in the Password window.

3.The Authentication Type should remain at the default setting.

4.Click the Add button when you are finished.

Multi-Tech Systems, Inc. PN 82001423L

21

Image 24
Contents MA30120 Quick Start Guide Contents Remote Access WAN CommunicationsManagement About This ManualSafety Recommendations for Rack Installations Ship Kit ContentsFront Panel Front Panel LED DescriptionsInstallation Site PlanningHardware Installation Cabling Procedure Back PanelStarting Your MultiAccess LoginPage Navigating Through the Screens Options Under Each MenuSetup Your Time Zone Network Setup Line Interfaces Modem Setup Modem UsagePage Click on the Save button Modem Setup Fax Setup Outbound Fax Client Data Base User Authentication Radius ClientPage Radius Server General Setup Radius Server User Setup Multi-Tech Systems, Inc. End User License Agreement Eula Multi-Tech Software License AgreementGNU General Public License License Agreements MultiAccess Quick Start Guide No Warranty 82001423L