EMPTYING THE DUST CONTAINER
1To remove the dust container from the cleaner press the bin release button.
2Hold the container over the bin and
press the bin open button.
43The dust container door will open and
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CLEANING THE PRE MOTOR FILTERS | CLEANING THE EXHAUST FILTER |
|
|
|
| ||||||||||
1 Rotate the upper part of the dust bin to open.
1 Remove the dust container rotate and remove the exhaust filter cover.
2 Remove the filter assembly from the dust bin.
2 Remove the xhaust filter.
3Separate the foam filter from the filter pack.
44
you can empty with no contact with the dust.
Once emptied, gently tap or shake the container to release any excess dust from the filters.
4Wash both filters under hand warm water until the water runs clean. Remove excess water by shaking and leave to dry for 24 hours.
When completely dry reassemble and refit filters to cleaner.
-7 -
3Wash the filter under hand warm water until the water runs clean. Remove excess water by shaking and leave to dry for 24 hours.
When completely dry reassemble and refit filters to cleaner.
48003559 Turbopower IM UK.indd 7
5/15/2012 9:56:27 AM 