SERVICE AND MAINTENANCE
Caring For Vacuum Hoses | Cleaning Exhaust Screen |
1.Inspect hoses before each use. If hoses have excessive wear, tears, or punctures, replace immediately.
2.To prolong the life of the hose, periodically rotate hose and turn hose end to end. Refer to Preventative Maintenance Schedule in this manual.
3.Avoid twists and sharp turns in the hoses, as they will increase wear on the hoses.
4.Avoid dragging the lower hose along the sides of buildings or other hard surfaces.
The exhaust screen on the Z9 is located inside the container. For best results, clean exhaust screen regularty.
Cleaning Instructions
1.Shut off all engines.
2.Release the two (2) rubber latches on the sides of the filter cover, and slide screen out.
3.Clean the screen, and replace.
DO NOT USE THE Z9 WITHOUT EXHAUST SCREEN SECURELY IN PLACE.
13