Yazoo/Kees Z9A manual Mounting the Z9

Page 8

ASSEMBLY

Mounting the Z9

NOTE: This portion of the assembly requires lifting the Z9; two people are required.

Tools Required:

1.9/16" wrench

2.Ratchet

3.9/16" socket

 

Upper

 

Frame

 

Hitch

Hitch

 

Bracket

 

Lower

 

Frame

Wire Lock

 

Pin

1.Install the Hitch from the Custom Kit accord- ing to the instruction sheet included in that carton.

2.Slide the Z9 into the hitch.

3.Line up holes in the Hitch and Z9 and se- cure with two (2) 3/8” wire lock pins.

4.Position the Hitch Brackets so that they are aligned with the holes on the top plate of the Hitch and the holes in the forward cross bar of the Lower Frame.

5.Secure with four (4) 3/8” x 1-1/4” hex bolts, four (4) 3/8” nylon lock nuts, and eight (8) 3/ 8” flat washers.

8

Image 8
Contents Z9 Commercial Collection System Index Operators GuideSpecifications Features & Controls Safety Rules General InformationOperation Unpacking Instructions AssemblyFrame Assembly Mounting the Z9 Spindle Drive Drive Kit Assembly Hose Trimming Operation Operating the VacuumService and Maintenance Cleaning and WashingPreventative Maintenance Schedule TransportCaring For Vacuum Hoses Cleaning Exhaust Screen Troubleshooting Guide Parts Illustration Container Assembly QTY Description Frame Assembly Hitch & Front Weight BAR Assembly Spindle Drive Assembly FAN Cover W/DECALS Drive KIT Assembly Page Toll Free Phone 877 368-TURF