UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax. ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING
OR ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY
Fig. 2
1 - Locking Bands for Filter and Dust Collection Bags (2)
2 - Filter Bag
3 - Dust Collection Bag
4 - Filter Bag Support Rod
5 - Extension Rod
6 - Clamps (2)
7 - 6" Dia. Flexible Hose
8 - Drum Support (3)
9- Casters (3/8" Lockwashers,
10 - “U” Bracket for Filter Bag Support Rod
11 - Lower Dust Bag retaining Clips (4)
Fig. 3
12 - Blower and Motor Assembly
13- Clamp
14- 4" Dia. Flexible Hose
15- Intake Port
16- Base
17- Intake Caps (2)
18- Drum
HARDWARE NOT SHOWN
* -
Hex Head Screws (20)
*- 5/16" Lockwashers (24)
*-
*- 5/16" x 7/8" O.D.
Flat Washers (6)
*- M4.2 Sheet Metal Screws (4)
*-
*- 1/4" Lockwashers (8)
*-
7
4 6
2 | 9 |
|
10
5
8
11
3
1
Fig. 2
12
15
18
17
16
13
14
Fig. 3
4