Senco M3, SNS50, SC2, M2, SC1 manual Senco Tool & Parts Warranty

Page 16

SENCO TOOL & PARTS WARRANTY

This tool has been designed and constructed using the highest standards of material and workmanship.

TOOL AND PARTS WARRANTY:

The length of this guarantee is one year from date of purchase by the origi- nal retail purchaser. During this period, Senco Products, Inc., will repair or replace at Senco’s option, any original part or parts for the original retail purchaser. This will be done free of charge, provided the parts are determined defective in materials or workmanship upon examination by a Senco Authorized Warranty Service Center (exception: rubber o-rings and seals, driver blades). Any replacement part provided will carry a warranty for the balance of the period of warranty applicable to the part it replaces.

This warranty will be honored, only if:

has

been used,

at air pressure

not

exceeding

the

A)

Clean,

dry,

regulated

compressed air

 

maximum indicated on the tool casting;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B) No

evidence of abuse, or failure to follow recommended operational maintenance, or

 

modification of the tool is present

(read Operator Manual for use and maintenance instructions);

 

 

C) When repair or replacement of parts or tools is necessary, the original retail purchaser

 

returns the complete tool or part, with transportation prepaid,

to the

nearest Senco

 

Authorized Warranty Service Center, with purchase receipt or other positive proof that

 

the part or tool is within the warranty period.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER

WARRANTIES,

WHETHER

ORAL,

 

WRITTEN,

EXPRESS,

OR

IMPLIED,

INCLUDING,

BUT

NOT

LIMITED

TO, THE

IMPLIED

WARRANTY

OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE, ARE EXCLUDED.

BUYER’S OR USER’S REMEDIES ARE

SOLELY

AND

EXCLUSIVELY AS

STATED

ABOVE.

SENCO

PRODUCTS,

INC.

SHALL

IN

NO EVENT BE LIABLE FOR INCIDENTAL,

 

CONSEQUENTIAL,

INDIRECT,

OR

SPECIAL

DAMAGES. IN NO EVENT, WHETHER AS A

RESULT

OF

A

BREACH

 

OF

CONTRACT,

WARRANTY, TORT

(INCLUDING

 

NEGLIGENCE)

OR

OTHERWISE,

SHALL

 

SENCO’S

 

LI-

ABILITY

EXCEED

THE PRICE OF

THE

TOOL

WHICH

HAS

GIVEN

RISE

 

TO THE

CLAIM

OR

LIABILITY.

 

ANY

LIABILITY

CONNECTED

WITH THE USE OF THIS TOOL SHALL

TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.

 

 

 

 

 

 

Replacement of Tool Due to Natural Disaster

Senco will also replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces of na - ture. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card, and then sub- mits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-543-4596.

SENCO PRODUCTS, INC.

CINCINNATI, OHIO 45244-1611 USA

Image 16
Contents SC1 SC2 English Not load with safety element or Locked position Hasta la posición cerradaLocked Solamente sujetadores Senco Pull adjustment rail out  Tirez le rail d’ajustement horsLes cannelures appropriées Magazine that match Sur l’intérieur du magasin quiPosition safety element De dos maneras Is preferred when high producDepress safety element against Feature is helpful when preciseRemueva las grapas Retirez les projectiles Staples Feeder shoe and allow to slideForward Hacia adelante Faites-le glisser en avantSNS40/41/44XP/45XP/50/SQS55  Conecte la línea de aire yFasteners Reemplace las grapas  Connect air supply and replaceDespachado con ella Operation and parts breakageUna operación no segura y Quebraduras de partesClean tool / tighten screws or install Parts Kit B Other problemsOtros problemas Autres problèmes Air leak near top of toolP10 P11 P12 P15 P17 P19 P21Inches N15 N16 N17 N18 N19 N21Q15 Q17 Q19 Q21 Q23 Q25 SenclampWeight Lbs 15 lbs Staple Capacity 140 160 Weight Lbs Staple Capacity8,3 bar 8,3 bar 80-120 psiPlacement is required Se requiere una colocación del  Détente RESTRICTIVE-CetteSujetador precisa ’impose Fasteners only, from 1/2 to 3/4Notas Marque English Espanol Senco Tool & Parts Warranty

SC2, M2, M3, SC1, SNS50 specifications

The Senco SNS50, SC1, M3, M2, and SC2 are part of an innovative lineup of tools designed for professional contractors and DIY enthusiasts alike, featuring advanced technologies and high-performance characteristics that set them apart in the market.

The Senco SNS50 is an innovative cordless nailer that offers superior power and precision for driving nails in various applications. It uses advanced battery technology to deliver consistent performance without the hassle of cords and compressors. The tool is lightweight, ergonomic, and features a tool-free depth adjustment for optimal results. Its integrated LED light helps illuminate dark work areas, which enhances visibility and accuracy.

The SC1 and SC2 models are designed for efficiency and versatility. Both nailers leverage Senco's Smart Point technology, which allows for easier nail placement and reduces the chances of misfires. The SC1 model is particularly advantageous for trimming applications, as it is able to drive 18-gauge finish nails with precision. The SC2, on the other hand, is perfect for larger projects, such as fencing and decking, due to its capability of driving heavier gauge nails.

For those who require a robust solution for heavier tasks, the M3 and M2 models stand out with their powerful pneumatic functionality. The M3 is engineered for high-volume nailing, boasting a rapid-fire mode that enhances productivity on large job sites. Its adjustable exhaust allows for better control of air flow, and its built-in air duster keeps the work area clean. The M2 complements this with a designed focus on mid-range applications, offering versatility in nail lengths and types while maintaining a lightweight form factor.

Each of these tools incorporates Senco’s renowned durability, ensuring they can withstand the rigors of daily use without compromising performance. Key characteristics include user-friendly controls, quick-release nose pieces for easy clearing of jams, and robust safety features to protect users during operation.

In summary, whether you're a professional contractor or a passionate DIYer, Senco's SNS50, SC1, SC2, M3, and M2 models provide a range of features and technologies that cater to a variety of nailing needs, delivering efficiency, precision, and reliability in every project.