Bostitch SW9040 5/8 SW9040 3/4 SW9040 7/8 manual Description, LW8

1.Apply LOCTITE 242 to screw thread before assembling hanger to tool.

2.Use a swivel type hook on the counterbalance used to suspend this tool.

VALVE

ASSEMBLY

D60064A

SEE VIEW “A”

54

55

56

57

VIEW “A”

ITEM	PART NO.	DESCRIPTION	ITEM	PART NO.	DESCRIPTION
NO.			NO.
1.	121830	Cylinder	26.	D16111A	Clincher Adj. Plate
2.	D16243	Cylinder Gasket	27.	D16112	Clincher Adj. Clamp
3.	T20111	Trigger	28.	D16114	Front Plate
4.	T20018	Trigger Pivot Pin	32.	D16149A	Pusher Assembly
5.	T20049	Trigger Pin Retaining Ring	34.	UA4814.1	1/4-20 x 7/8 Soc. Hd.
6.	D16163A	Frame			Cap Screw
7.	85014	“O” Ring	35.	LW14.2	1/4 Lock Washer
8.	D16168	Driver Guide L.H.	36.	UA9607	1/4 Pipe Plug
9.	D16167	Driver Guide R.H.	37.	UA4816.12	1/4-20 x 1” Cone Pt.
10.	D16179	Driver Block			Set Screw
13.	UA4006.2	Driver Retaining Screw	38.	HN1420.2	1/4-20 Hex Jam Nut
14.	D16327	Retaining Screw Spacer	39.	UA2810	#8-32 x 5/8” Soc. Hd.
15.	D16180	Piston Rod			Cap Screw
16.	85012	“O” Ring	40.	LW8	#8 Lock Washer
17.	D16185	Driver Block Pin	41.	HN3824.4	3/8-24 Elastic Stop Nut
18.	D14227B	Piston	42.	UA2808.1	#8-32 x 1/2” Soc. Hd.
19.	D16146	Piston Washer			Cap Screw
20.	85016	“O” Ring	43.	LW8	#8 Lock Washer
21.	D16183	Escapement Roller	44.	PW516.4	Washer
22.	D16184A	Clincher Link Plate	45.	UA5812.3	5/16-18 x 3/4” Soc. Hd.
23.	D14130	Clincher Link			Cap Screw
24.	D14132A	Clincher Lever L.H.	46.	UA 3808.8	#10-24 x 1/2” Soc. Hd.
25.	D14133A	Clincher Lever R.H.			Cap Screw