Delta Sanding Center: 6" Belt/12" Disc Sander Instruction Manual

Page 1

Sanding Center

6" Belt/12" Disc Sander

(Model 31-280)

INSTRUCTION MANUAL

PART NO. 406-12-651-0004 - 07-31-01)

Copyright © 2001 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Sanding Center Belt/12 Disc Sander Model Refer to them often and use them to instruct others Power Connections Additional Safety Rules for Sanding CenterMotor Specifications All grounded, cord-connected tools Grounding InstructionsChanging Voltage Extension CordsOperating Instructions Attaching Sanding Disc Attaching Tool To StandAttaching Disc Table Attaching Dust Chute Locking Switch in the OFF PositionMoving Sanding ARM to the Vertical Position Starting and Stopping the ToolOverload Protection Adjusting Tension and Tracking of the Sanding BeltTilting the Belt Sander Table Adjusting Sanding Belt Degrees to BeltChanging Position of Sanding ARM Adjusting Sanding Disc Degrees to DiscTilting the Disc Sander Table Accessory Holder Adjusting Sanding Disc GuardCircle Sanding Attachment Replacing Sanding Belt Power TAKE-OFF ShaftReplacing Sanding Disc Accessories PARTS, Service or Warranty Assistance Canadian PORTER-CABLE Delta Service Centers