Power tool use and care
y Safet
p Setu
1.Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
2.Do not use the power tool if the Trigger does not turn it on and off.
Any power tool that cannot be controlled with the Trigger is dangerous and must be repaired.
3.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
4.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of untrained users.
5.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
6.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
7.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
Non‑disc Sander Safety Warnings
Operation
ec
Maintenan
1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a ″live″ wire will make exposed metal parts of the tool ″live″ and shock the operator.
2.Maintain labels and nameplates on the tool. These carry important safety information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.Avoid unintentional starting.
Prepare to begin work before turning on the tool.
4.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.
5.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.
6.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
7.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
8.This product is not a toy.
Keep it out of reach of children.
9.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
•Avoid operating alone.
•Do not use with Trigger locked on.
•Properly maintain and inspect to avoid
electrical shock.
•Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
Page 4 | For technical questions, please call | Item 98622 |