Marantz Essential Functions and Features of a Premium Home Theater System

NAMES AND FUNCTIONS OF PARTS

FRONT PANEL

q w

!2 !1 !0 o i u y t r e

o Dolby PL II indicator		ENGLISH
Logic II mode is set to Pro Logic II MOVIE
The indicator lights in green when 2-
channel signal is input and the Dolby Pro
or Pro Logic II MUSIC.
When Dolby Pro Logic II mode is set to
OFF by pressing the Dolby PL II button
on the remote controller, this indicator
goes out.
!0Dolby D indicator
When a Dolby digital signal is input, this
indicator lights in blue.
!1dts/AAC/PCM indicator
The indicator lights in the following colors
according to the format of digital signal
input from the connected equipment:
dts signal:	red
AAC signal:	yellow
PCM signal:	green

qON/STANDBY button

Press this button to turn on the power. When it is pressed again, the unit goes into standby mode and the STANDBY indicator i lights.

wDisplay window

Normally, the volume level indication (00- 60) is displayed.

eVOLUME + button

Press this button to increase the volume. Keeping this button pressed increases the volume successively.

rVOLUME – button

Press this button to decrease the volume. Keeping this button pressed decreases the volume successively.

tSUB WOOFER indicator

The indicator lights in green when subwoofer output is activated by pressing the SUBWOOFER button on the remote controller.

The indicator goes out when subwoofer output is set to off by pressing the SUBWOOFER button on the remote controller.

The subwoofer output is set to on and the indicator is lit as the factory-setting mode.

Note:

Before installing this unit, connect a commercially available or optional Marantz subwoofer with a built-in amplifier.

yNIGHT MODE indicator

The indicator lights in green when the night mode function is activated.

The indicator goes out when the night mode function is canceled by pressing the NIGHT MODE button on the remote controller.

Note:

The night mode function can be activated only when the Dolby D (Digital) indicator is lit blue.

uMODE indicator

The indicator lights in blue when the binaural mode is activated. The indicator goes out when the binaural mode is canceled by pressing the MODE button on the remote controller.

Note:

The binaural mode can be set when an audio source recorded in binaural mode is played.

iSTANDBY indicator

The indicator lights in red when the unit is in standby mode.

The indicator goes out when the A1 or A2 button on the remote controller is pressed to select an analog input signal.

!2INPUT SELECTOR button

Press this button to select the input source to be played.

Each press of the button changes the indication in the display window as shown below.

The factory-preset setting is “d1.”

A2 (AUX)d1(DVD)

A1 (VCR)

d2 (TV)

H2(HDMI 2)

d3 (GAME)

H1(HDMI 1)

5