ENGLISH
NAMES AND FUNCTIONS OF PARTS
7 Buttons used for a TV
⁄4TV POWER button
7Preset code setting
Notes:
•Before using the remote controller for a TV, set the preset code for the TV.
•For details on the operation of the TV, refer to the instruction manual supplied with the TV.
⁄4
¤1 | ⁄5 |
¤0 | ⁄6 |
|
⁄9⁄7
Press this button to turn on the TV or to set it to standby mode.
⁄5TV MUTE button
Press this button to mute the TV sound temporarily. Press it again to restore the sound.
⁄6TV VOL + button
Press this button to increase the volume of the TV.
⁄7TV VOL – button
Press this button to decrease the volume of the TV.
⁄8Numeric (1-12) buttons
These buttons are used for direct TV channel selection.
The remote control codes of TVs of manufacturers other than Marantz are preset in the supplied remote controller. To use the supplied remote controller for the TV of another manufacturer, enter the code in the remote controller.
1.Check the
2.While holding down the TV POWER button ⁄4on the remote controller, press the Numeric buttons ⁄8to enter the
Presetting the code number to the remote controller is complete.
Notes:
⁄8
⁄9CH (channel) + button
Press this button to scan forward through the TV channels.
¤0CH (channel) - button
Press this button to scan reverse through the TV channels.
¤1INPUT SELECT button
Press this button to switch between the TV broadcast and a video input.
•Some of the preset codes in the lists may not be compatible with your TV.
•If your TV does not operate with the remote controller after entering the preset code, try to enter another code number of the manufacturer.
•Some of the functions of the TV may not be operable with the remote controller even after entering the code.
8
