Marantz ES7001 manual Setting the VIEWING/ Listening Distance, Setting the Subwoofer Output

ENGLISH

SETTINGS

SETTING THE VIEWING/ LISTENING DISTANCE

•This item is used to set the distance between the unit and audience.

•Hold down the SEAT button on the remote controller for over two seconds to change the setting.

Each time you hold down the button for over two seconds while the viewing/listening distance indication is displayed in the display window, the setting switches as described below.

This item is set to “Approx. 2 m” at the factory.

2 m or	Approx.	2 m or
shorter	2 m	longer

¶When the distance is shorter than 2 m (78 3⁄4 inches)

¶When the distance is approximately 2 m (78 3⁄4 inches)

¶When the distance is longer than 2 m (78 3⁄4 inches)

SETTING THE SUBWOOFER OUTPUT

• PresstheSUBWOOFERbuttonontheremote

controller when you use a commercially

available or optional SW7001 subwoofer with

a built-in amplifier so that the SUB WOOFER

indicator lights. The subwoofer output is

activated, enabling output of low-frequency

sound from the connected subwoofer.

The low-frequency sound from this unit is

adjusted so that it does not overlap with that

from the connected subwoofer.

• To turn off the subwoofer output, press

the SUBWOOFER button on the remote

controller once to display the “On” indication

in the display window, then press it again

while the indication is displayed.

SUBWOOFER button

Lights

SEAT button

(Hold down over

two seconds.)

Notes:

•When the audience is 2.5 m (98 1⁄2 inches) or farther away from the unit with the viewing/listening distance set to “2 m or longer,” the stereophonic effect of the speakers may be reduced.

•When the audience is close 1.5 m (59 1/8 inches) or less to the unit with the viewing/ listening distance set to “2 m or shorter,” the stereophonic effect of the speakers may be reduced.

The indication in the display window

changes to “OF” and the SUB WOOFER

indicator goes out. The subwoofer output

is set to off and low-frequency sound of the

unit is restored.

• This setting is set to “On” at the factory.

¶When the subwoofer output is set to on

¶When the subwoofer output is set to off

Notes

•Be sure to set the subwoofer output to off when you do not use an external subwoofer. Optimum low-frequency sound is only output from the speakers built in the unit with the subwoofer output set to off.

•You cannot adjust the volume level of the connected subwoofer with this unit. Adjust it with the connected subwoofer.

18