Marantz ES7001 Setting The Binaural Mode, Setting The Dolby Pro Logic Ii Mode, Settings, English

SETTINGS

SETTING THE BINAURAL MODE

•Press the MODE button on the remote controller to listen to the audio source recorded in binaural mode.

•The MODE indicator lights in blue and the stereophonic effect of the sound source is reproduced especially realistically.

Note:

The binaural mode is automatically canceled when a sound source other than 2-channel PCM sound or analog sound is input.

MODE button

Lights

SETTING THE DOLBY PRO LOGIC II MODE

•This item is used to select the sound field environment produced by Dolby Pro Logic

II.

•When the unit is set to “PL II MOVIE” or “PL II MUSIC,” the Dolby PL II indicator lights.

•Each time you press the Dolby PL II button on the remote controller, the sound field setting changes as follows:

PL II MOVIE PL II MUSIC OFF

Dolby PL II button

Lights

¶When “PL II MOVIE” is selected

Stereophonic effect is obtained from the soundtrack of a stereo movie encoded by Dolby Surround.

¶When “PL II MUSIC” is selected

Stereophonic effect is obtained from a conventional stereo source such as a CD player, iPod, etc.

¶When “OFF” is selected

The Dolby Pro Logic II mode is turned off.

If the signal source is input from the ANALOG IN 1 (VCR) or 2 (AUX) jacks, or 2-channel digital signal is input when the Dolby Pro Logic II mode is set to “PL II MOVIE” or “PL II MUSIC,” the setting is automatically switched to “PL II MOVIE” and the Dolby PL II indicator lights.

Notes:

•To change the setting, press the Dolby PL II button repeatedly.

•The selected setting of Dolby Pro Logic II mode is saved in the unit.

ENGLISH

19