Grizzly G0719 owner manual Power Connection, Connecting Power

Page 18

6.With the help of another person, place the sanding unit onto the top of the cabinet, as shown in Figure 10, and fasten it to the cabi- net using (4) M8-1.25 x 45 hex bolts and (4) 5⁄16" flat washers.

Figure 10. Sander installation.

7.Adjust the feet as necessary to level the machine, then tighten the hex nuts against the cabinet base.

8.Make sure that all tools and objects used for setup are cleared away from the machine.

The machine is now fully assembled and ready for the test run procedure.

Figure 11. Fully assembled sander.

-16-

Power Connection

Before the machine can be connected to the power source, an electrical circuit and connec- tion device must be prepared per the POWER SUPPLY section in this manual, and all previ- ous setup instructions in this manual must be complete to ensure that the machine has been assembled and installed properly.

Connecting Power

1.Turn the machine power switch OFF.

2.Insert the power cord plug into a matching power supply receptacle. The machine is now connected to the power source.

Figure 12. Connecting power.

Disconnecting Power

1.Turn the machine power switch OFF.

2.Grasp the molded plug and pull it completely out of the receptacle. Do not pull by the cord as this may damage the wires inside.

Figure 13. Disconnecting power.

Model G0719 (Mfg. Since 10/10)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model G0719 Page Table of Contents Introduction Manual Accuracy Contact InfoMachine Description Identification MacHine data SHeet Model G0719 Mfg. Since 10/10Other Safety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Disc Sanders Power Supply Minimum Gauge Size 14 AWG 50 ftUnpacking SetupNeeded for Setup Description QtyInventory Main Inventory Figure QtyCleanup Before cleaning, gather the followingBasic steps for removing rust preventative Weight Load Site ConsiderationsAssembly To assemble the cabinet and mount the machinePower Connection Connecting PowerTest Run To test run the machineOperations Operation OverviewAttaching Sandpaper Disc Sanding To attach sandpaperExample of X-axis sanding Model and Type AccessoriesReplacement Sanding Discs for Model G0719 Size ModelSchedule MaintenanceCleaning Unpainted Cast IronService TroubleshootingReduce sanding depth or install coarser sandpaper To set the table gap and parallelism GaugeTools Needed To calibrate the miter gaugeTable Tilt Calibration To calibrate the table tiltWiring Wiring Safety InstructionsModel G0719 Mfg. Since 10/10 Parts MainMachine Labels Warranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

G0719 specifications

The Grizzly G0719 is a versatile and robust milling machine designed for both hobbyists and professionals in the woodworking and metalworking industries. A perfect blend of power, precision, and portability, the G0719 has garnered a reputation for its high performance and user-friendly features.

One of the main highlights of the Grizzly G0719 is its impressive 1 HP motor, which supplies ample power for a variety of milling tasks. This machine operates on 120V, making it compatible with standard outlets, thus providing flexibility in where it can be used. The variable speed control allows users to adjust the RPM from 100 to 1,800, enabling the machine to handle various materials with ease.

The G0719 features a heavy-duty cast iron base, which ensures stability during operation and minimizes vibrations. This contributes to better precision and ultimately results in cleaner finishes on workpieces. The sizeable dovetail column is another notable characteristic that adds to the rigidity and accuracy of this milling machine, making it ideal for detailed and intricate machining tasks.

Equipped with a 6-inch quill travel range and a convenient manual feed, the G0719 empowers users to achieve precise height adjustments. The adjustable headstock allows for vertical movement, helping to facilitate a variety of machining angles. This flexibility is particularly beneficial for users who require versatility in their projects.

The G0719 also features a standard R8 spindle that accepts various tool holders, affording users endless options for tooling up according to their specific needs. The built-in work light is an advantage that enhances visibility, allowing for meticulous work, especially in low-light conditions.

Moreover, the machine includes a built-in coolant system, which helps manage heat during operation, thereby prolonging the tool life and offering users a more extended period of uninterrupted work.

Overall, the Grizzly G0719 milling machine combines robust construction, impressive features, and user-friendly technology, making it a valuable addition to any workshop. Its mix of power and precision, along with its adaptability for different milling tasks, positions it as a reliable choice for those looking to enhance their metalworking and woodworking capabilities. With this machine, users can expect professional results, whether they are tackling small projects or larger, more complex tasks.
Top Page Image Contents