Grizzly G0719 owner manual Power Supply

Page 11

SECTION 2: POWER SUPPLY

Availability

Before installing the machine, consider the avail- ability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed. To minimize the risk of electrocu- tion, fire, or equipment damage, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards.

Electrocution, fire, or equipment damage may occur if machine is not correctly grounded and connected to the power supply.

Full-Load Current Rating

The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple motors, this is the amperage drawn by the largest motor or sum of all motors and electrical devices that might operate at one time during normal operations.

Full-Load Current Rating at 220V...... 12 Amps

The full-load current is not the maximum amount of amps that the machine will draw. If the machine is overloaded, it will draw additional amps beyond the full-load rating.

If the machine is overloaded for a sufficient length of time, damage, overheating, or fire may result— especially if connected to an undersized circuit. To reduce the risk of these hazards, avoid over- loading the machine during operation and make sure it is connected to a power supply circuit that meets the requirements in the following section.

Circuit Information

A power supply circuit includes all electrical equipment between the breaker box or fuse panel in the building and the machine. The power sup- ply circuit used for this machine must be sized to safely handle the full-load current drawn from the machine for an extended period of time. (If this machine is connected to a circuit protected by fuses, use a time delay fuse marked D.)

For your own safety and protection of property, consult a qualified electrician if you are unsure about wiring practices or electrical codes in your area.

Note: The circuit requirements listed in this man- ual apply to a dedicated circuit—where only one machine will be running at a time. If this machine will be connected to a shared circuit where mul- tiple machines will be running at the same time, consult a qualified electrician to ensure that the circuit is properly sized for safe operation.

Circuit Requirements

This machine is prewired to operate on a 220V power supply circuit that has a verified ground and meets the following requirements:

Nominal Voltage

220V/240V

Cycle

60 Hz

Phase

Single-Phase

Circuit Rating

15 Amps

Plug/Receptacle

NEMA 6-15

Model G0719 (Mfg. Since 10/10)

-9-

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model G0719 Page Table of Contents Machine Description IntroductionManual Accuracy Contact Info Identification Model G0719 Mfg. Since 10/10 MacHine data SHeetOther Safety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety for Disc Sanders Power Supply 50 ft Minimum Gauge Size 14 AWGDescription Qty SetupNeeded for Setup UnpackingMain Inventory Figure Qty InventoryBasic steps for removing rust preventative CleanupBefore cleaning, gather the following Site Considerations Weight LoadTo assemble the cabinet and mount the machine AssemblyConnecting Power Power ConnectionTo test run the machine Test RunOperation Overview OperationsTo attach sandpaper Attaching Sandpaper Disc SandingExample of X-axis sanding Size Model AccessoriesReplacement Sanding Discs for Model G0719 Model and TypeUnpainted Cast Iron MaintenanceCleaning ScheduleTroubleshooting ServiceReduce sanding depth or install coarser sandpaper To calibrate the miter gauge GaugeTools Needed To set the table gap and parallelismTo calibrate the table tilt Table Tilt CalibrationWiring Safety Instructions WiringModel G0719 Mfg. Since 10/10 Main PartsMachine Labels Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

G0719 specifications

The Grizzly G0719 is a versatile and robust milling machine designed for both hobbyists and professionals in the woodworking and metalworking industries. A perfect blend of power, precision, and portability, the G0719 has garnered a reputation for its high performance and user-friendly features.

One of the main highlights of the Grizzly G0719 is its impressive 1 HP motor, which supplies ample power for a variety of milling tasks. This machine operates on 120V, making it compatible with standard outlets, thus providing flexibility in where it can be used. The variable speed control allows users to adjust the RPM from 100 to 1,800, enabling the machine to handle various materials with ease.

The G0719 features a heavy-duty cast iron base, which ensures stability during operation and minimizes vibrations. This contributes to better precision and ultimately results in cleaner finishes on workpieces. The sizeable dovetail column is another notable characteristic that adds to the rigidity and accuracy of this milling machine, making it ideal for detailed and intricate machining tasks.

Equipped with a 6-inch quill travel range and a convenient manual feed, the G0719 empowers users to achieve precise height adjustments. The adjustable headstock allows for vertical movement, helping to facilitate a variety of machining angles. This flexibility is particularly beneficial for users who require versatility in their projects.

The G0719 also features a standard R8 spindle that accepts various tool holders, affording users endless options for tooling up according to their specific needs. The built-in work light is an advantage that enhances visibility, allowing for meticulous work, especially in low-light conditions.

Moreover, the machine includes a built-in coolant system, which helps manage heat during operation, thereby prolonging the tool life and offering users a more extended period of uninterrupted work.

Overall, the Grizzly G0719 milling machine combines robust construction, impressive features, and user-friendly technology, making it a valuable addition to any workshop. Its mix of power and precision, along with its adaptability for different milling tasks, positions it as a reliable choice for those looking to enhance their metalworking and woodworking capabilities. With this machine, users can expect professional results, whether they are tackling small projects or larger, more complex tasks.
Top Page Image Contents