Grizzly G0719 owner manual Attaching Sandpaper Disc Sanding, To attach sandpaper

Page 21

Attaching Sandpaper

Disc Sanding

 

 

 

 

 

 

The Model G0719 sander accepts 15" diameter adhesive-backed sanding discs. These are avail- able in a variety of grits.

The sanding disc sticks to the surface of the cast iron disc platen, using the pressure-sensitive adhesive (PSA) backing. The sandpaper can be replaced without removing the table or dust port.

To attach sandpaper:

1.DISCONNECT MACHINE FROM POWER!

2.Remove the safety guard, peel off the old sandpaper, clean the disc surface with min- eral spirits, and wipe it dry.

3.Peel back the protective layer on one-halfof the sandpaper disc and fold it against the remaining half.

4.Slip the half with the protective layer between the disc and the table edge (see Figure 15).

Figure 15. Sandpaper being slipped between

the disc and table.

5.Position the exposed adhesive on the upper half of the disc that extends above the table. Once it is positioned evenly across the disc, press the adhesive onto the surface.

6.Rotate the disc so the lower half is above the table. Peel off the other half of the protective paper, and press the remaining sandpaper against the disc so adhesion is complete.

7.Re-install the safety guard.

Model G0719 (Mfg. Since 10/10)

The Model G0719 uses dual-axis miter slot design for increased versatility of workpiece control.

Always keep the guard in place and the workpiece on the side of the wheel that is rotating down. This will reduce the likeli- hood of the workpiece being ejected.

To reduce the risk of your fingers getting trapped between the work table and sand- ing disc, make sure the table is approxi- mately 3⁄16" away from the sanding disc.

To use the sanding disc:

1.DISCONNECT SANDER FROM POWER!

2.Set the angle of the table and miter gauge for your operation. Make sure the table is about 3⁄16" away from the sanding disc.

3.Connect the sander to power, turn it ON, and allow it to reach full speed.

4.With the guard in place, position the workpiece on the work table against the miter gauge.

5.With light, but firm pressure, push the workpiece into the down-spin side of the rotating disc. See Figures 16–19for exam- ples of disc sanding.

Figure 16. Example of Y-axis sanding.

-19-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model G0719 Page Table of Contents Introduction Manual Accuracy Contact InfoMachine Description Identification Model G0719 Mfg. Since 10/10 MacHine data SHeetOther Safety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety for Disc Sanders Power Supply 50 ft Minimum Gauge Size 14 AWGNeeded for Setup SetupUnpacking Description QtyMain Inventory Figure Qty InventoryCleanup Before cleaning, gather the followingBasic steps for removing rust preventative Site Considerations Weight LoadTo assemble the cabinet and mount the machine AssemblyConnecting Power Power ConnectionTo test run the machine Test RunOperation Overview OperationsTo attach sandpaper Attaching Sandpaper Disc SandingExample of X-axis sanding Replacement Sanding Discs for Model G0719 AccessoriesModel and Type Size ModelCleaning MaintenanceSchedule Unpainted Cast IronTroubleshooting ServiceReduce sanding depth or install coarser sandpaper Tools Needed GaugeTo set the table gap and parallelism To calibrate the miter gaugeTo calibrate the table tilt Table Tilt CalibrationWiring Safety Instructions WiringModel G0719 Mfg. Since 10/10 Main PartsMachine Labels Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

G0719 specifications

The Grizzly G0719 is a versatile and robust milling machine designed for both hobbyists and professionals in the woodworking and metalworking industries. A perfect blend of power, precision, and portability, the G0719 has garnered a reputation for its high performance and user-friendly features.

One of the main highlights of the Grizzly G0719 is its impressive 1 HP motor, which supplies ample power for a variety of milling tasks. This machine operates on 120V, making it compatible with standard outlets, thus providing flexibility in where it can be used. The variable speed control allows users to adjust the RPM from 100 to 1,800, enabling the machine to handle various materials with ease.

The G0719 features a heavy-duty cast iron base, which ensures stability during operation and minimizes vibrations. This contributes to better precision and ultimately results in cleaner finishes on workpieces. The sizeable dovetail column is another notable characteristic that adds to the rigidity and accuracy of this milling machine, making it ideal for detailed and intricate machining tasks.

Equipped with a 6-inch quill travel range and a convenient manual feed, the G0719 empowers users to achieve precise height adjustments. The adjustable headstock allows for vertical movement, helping to facilitate a variety of machining angles. This flexibility is particularly beneficial for users who require versatility in their projects.

The G0719 also features a standard R8 spindle that accepts various tool holders, affording users endless options for tooling up according to their specific needs. The built-in work light is an advantage that enhances visibility, allowing for meticulous work, especially in low-light conditions.

Moreover, the machine includes a built-in coolant system, which helps manage heat during operation, thereby prolonging the tool life and offering users a more extended period of uninterrupted work.

Overall, the Grizzly G0719 milling machine combines robust construction, impressive features, and user-friendly technology, making it a valuable addition to any workshop. Its mix of power and precision, along with its adaptability for different milling tasks, positions it as a reliable choice for those looking to enhance their metalworking and woodworking capabilities. With this machine, users can expect professional results, whether they are tackling small projects or larger, more complex tasks.
Top Page Image Contents