Models
Installation and Operating
Instructions
Features
•Automatically comes on when motion is detected.
•Automatically turns light off.
•Photocell keeps the light off during daylight hours.
Requirements
•The Light Control requires 120 volts AC.
•If you want to use Manual Mode, the control must be wired through a switch.
•Someelectricalcodesrequireinstallationbyaqualified electrician. Please check the codes in your area.
Unpacking
Be sure to remove all contents from packaging and verify all items are present before assembling this light fixture. This package includes the following items:
•Lantern (Includes: Top Cover, Glass Fixture, Fixture Base)
•Universal mounting bracket
•Mounting hardware
•Wire nuts
•Owner’s Manual
Carriage Light with Motion-activated Sensor
Lantern Assembly
1.Place glass fixture onto base assembly.
2.Line up the arrow on the bottom of glass fixture with the arrow on the fixture base (see illustration below).
Glass Fixture 
Arrows
Fixture Base
3.Gently push the two pieces together and rotate the glass fixture 90° as shown below.
Glass Fixture
Fixture Base
Beforeinstallation,recordthemodelnumberlisted inside the fixture. Attach receipt in case of possible warranty issues.
Model Number: