INSTALLATION
For best performance, mount the fixture about 6 feet (1.8 m) above the ground.
1.Remove two decorative nuts.
2.Remove
3.Tighten mounting screws on
4.Attach
Lantern
Decorative Nut 
Lantern Mounting
Screw
Junction Box
Bracket Mounting
Screw
Note: We recommend having an assistant help hold the lantern assembly during the wiring process.
Wiring
WARNING: Turn power off at circuit breaker or fuse.
Note: All wiring must be run in accordance with the Canadian Electrical Code through conduit or another acceptable means.Contact a qualified electrician if there is any question as to the suitability of the system.
CAUTION:DONOTconnecttheREDwireunless you want to control other lights from the motion sensor (see Optional Wiring).
Black
Green or
Bare
White
One Motion Light
Black
Green or
Bare
White
Two Motion Lights
Connect the fixture wires to the wires in the junction box. Twist the wires together and secure with wire con- nectors.