Heath Zenith 5630 manual Installation, Mode Switching Summary, DualBrite Feature

Page 2

Mode Switching Summary

1. Remove the existing light fixture.

TEST

AUTO

MANUAL MODE

Move ON-TIME Switch to

1, 5, or 20 minutes

Flip light switch off for one second then back on*

2.

Remove two cover

 

screws and remove

 

cover.

3.

Remove the reflector

Cover

Screws

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the Normal mode.

DualBrite® Feature

DUSK

With the DualBrite® control in the up

 

TO

position, the light will come on at low

DAWN

level from dusk to dawn. If motion is

(DIM)

detected in the Normal mode, the light

 

 

 

 

will turn on to full brightness.

 

 

 

 

 

 

 

 

*When switching Normal modes, wait

 

 

 

 

about 1 1/2 minutes for the circuitry to

NORMAL

calibrate.

 

 

 

 

INSTALLATION

For easy installation, select an existing wall mounted light fixture with a wall switch for replacement.

For best performance, mount the fixture between 6 and 8 feet (2.4 m) above the ground.

Note: Mounting fixture higher than 8 ft. (2.4 m) will reduce coverage distance.

WARNING: Turn power off at circuit breaker or fuse.

screw and remove

reflector.

Reflector

Screw

4.Mount adapter bracket. Note: The adapter bracket is universal. Rotate or flip over bracket as needed to align with junction box holes.

IF JUNCTION BOX MOUNTING HOLES ARE HORIZONTAL:

a. Align slots on bracket with mounting holes in junction box.

b.Apply silicone caulk around junction box or on adapter bracket.

c.Press adapter bracket against junction box.Verify junction box mounting holes align with slots.Wait 5 minutes. Go to step 5.

Junction Box

Mounting Adapter

 

Horizontal

 

Mounting Holes

Bracket

 

Mounting Slots

Caulk

598-1132-06

Image 2
Contents Test Manual ModeOperation NormalDualBrite Feature InstallationMode Switching Summary Bulb Installation If Junction BOX Mounting Holes are not HorizontalSet Light Controls SpecificationsTroubleshooting Guide Technical Service Operación Característica DualBrite InstalaciónResumen de las modalidades del interruptor Instalación De La Bombilla Calibre Los Controles De La Lámpara EspecificacionesGuia DE Investigacion DE Averias Servicio Técnico Garantía Limitada a 5 AñosExigences FonctionnementCaractéristiques EssaiRésumé du mode de commutation Fonction DualBriteMDInstallation DE LA Lampe Blanc / BlancGuide DE Dépannage Réglage DES CommandesFiche Technique Service Technique Garantie Limitée DE 5 ANSDate of Purchase

5630 specifications

The Heath Zenith 5630 is a versatile and efficient motion-activated security light designed to enhance the safety and security of residential and commercial properties. Equipped with advanced features, this product stands out in the crowded marketplace of outdoor lighting solutions.

One of the main features of the Heath Zenith 5630 is its adjustable motion sensor, which has a detection range of up to 100 feet. This ensures that the light activates when movement is detected within its vicinity, providing a reliable deterrent against potential intruders. The sensor's sensitivity can also be customized, allowing users to fine-tune the detection threshold based on specific needs, such as varying landscaping or environmental conditions.

The Heath Zenith 5630 employs LED technology, offering a bright and energy-efficient lighting solution. The LED bulbs not only consume less electricity compared to traditional incandescent lights but also boast a longer lifespan, reducing the frequency of replacements. This makes the 5630 an eco-friendly choice, contributing to lower energy bills while ensuring sufficient illumination for outdoor areas.

Another notable characteristic of this security light is its weather-resistant design. Built to withstand various environmental conditions, the Heath Zenith 5630 features a durable housing that protects against rain, snow, and extreme temperatures. This durability ensures long-term performance and reliability, making it suitable for installation in various outdoor settings.

In addition to its motion sensor functionality, the Heath Zenith 5630 includes adjustable brightness settings. Users can select different light levels according to their preferences or the time of day. This feature allows for optimal visibility while minimizing light pollution in the surrounding area.

Installation of the Heath Zenith 5630 is straightforward, with a user-friendly mounting system that can be adapted to various surfaces. The light can be positioned to point in multiple directions, ensuring that key areas are illuminated effectively.

Overall, the Heath Zenith 5630 combines cutting-edge technology with practical features, providing an effective and economical solution for outdoor lighting and security needs. With its robust performance, energy efficiency, and adjustable settings, this motion-activated security light is an excellent choice for anyone looking to enhance safety around their property while enjoying the benefits of modern lighting technology.