Heath Zenith 5630 manual Specifications, Troubleshooting Guide, Set Light Controls

Page 4

Set Light Controls

1.Select desired ON-TIME for the light to stay on after motion is detected (1, 5, or 20 minutes).

2.Set DualBrite® control to Dusk-to-Dawn (DIM) or Normal.

Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off and ON-TIME is 1 or 5 minutes.

3.Reinstall cover.

4.Turn power on at the fuse or circuit breaker and light switch.

190°

8 ft.

(2.4 m)

30 ft. (9 m)

Maximum Range

Maximum

 

Coverage Angle

The detector is less sensitive to motion directly towards it.

Motion

 

 

Motion

 

Sensor

Least Sensitive

Most Sensitive

 

SPECIFICATIONS

Range

Up to 30 ft. (9,1 m). [varies with surrounding temperature]

Sensing Angle

Up to 190°

Electrical Load

Up to 100 Watt Maximum Halogen, 78 mm T-type

Power Requirements

120 VAC, 60 Hz

Operating Modes

TEST, NORMAL, and MANUAL MODE

Time Delay

1, 5, 20 minutes from last motion sensed

DualBrite® Feature

Dusk-to-Dawn

 

TROUBLESHOOTING GUIDE

SYMPTOM

 

POSSIBLE CAUSE

 

 

 

Light will not come

1.

Light switch is turned off.

on.

 

2.

Halogen lamp is loose or

 

 

 

burned out.

 

 

3.

Fuse is blown or circuit breaker

 

 

 

is turned off.

 

 

4.

Daylight turn-off is in effect (re-

 

 

 

check after dark).

 

 

5.

Incorrect circuit wiring, if this is

 

 

 

a new installation.

 

 

 

 

Light comes

on

1.

Wall light may be installed in a

in daylight.

 

 

relatively dark location.

 

 

2.

Wall light is in Test. (Set control

 

 

 

switch to an ON-TIME position).

 

 

 

Light comes on for

1.

Lightcontrolmaybesensingsmall

no apparent

rea-

 

animals or automobile traffic.

son.

 

2.

DualBrite® Timer is on.

SYMPTOM

POSSIBLE CAUSE

 

 

 

 

Light

turns

1.

Wall light may be installed in a relatively

off too

late in

 

dark location.

Dusk-to-Dawn

 

 

setting.

 

 

 

 

 

Light stays on

1. Wall light is located too close to nearby

continuously.

 

objects that cause heat to trigger the

 

 

 

sensor such as an air vent, dryer vent,

 

 

 

or brightly-painted, heat-reflective

 

 

 

surface.

 

 

2.

Wall light is in DualBrite® mode.

 

 

3.

Light control is in Manual mode (Switch

 

 

 

to Normal).

 

 

 

Light flashes

1.

Heat being reflected from other objects

on and off.

 

may be affecting the sensor. (Move or

 

 

 

cover other objects to find which ones

 

 

 

are causing the problem).

 

 

2.

Wall light is in the Test mode. Return

 

 

 

to the 1, 5, or 20 minute timer mode.

 

 

 

 

598-1132-06

Image 4
Contents Manual Mode OperationTest NormalMode Switching Summary InstallationDualBrite Feature Bulb Installation If Junction BOX Mounting Holes are not HorizontalTroubleshooting Guide SpecificationsSet Light Controls Technical Service Operación Resumen de las modalidades del interruptor InstalaciónCaracterística DualBrite Instalación De La Bombilla Guia DE Investigacion DE Averias EspecificacionesCalibre Los Controles De La Lámpara Servicio Técnico Garantía Limitada a 5 AñosFonctionnement CaractéristiquesExigences EssaiRésumé du mode de commutation Fonction DualBriteMDInstallation DE LA Lampe Blanc / BlancFiche Technique Réglage DES CommandesGuide DE Dépannage Service Technique Garantie Limitée DE 5 ANSDate of Purchase

5630 specifications

The Heath Zenith 5630 is a versatile and efficient motion-activated security light designed to enhance the safety and security of residential and commercial properties. Equipped with advanced features, this product stands out in the crowded marketplace of outdoor lighting solutions.

One of the main features of the Heath Zenith 5630 is its adjustable motion sensor, which has a detection range of up to 100 feet. This ensures that the light activates when movement is detected within its vicinity, providing a reliable deterrent against potential intruders. The sensor's sensitivity can also be customized, allowing users to fine-tune the detection threshold based on specific needs, such as varying landscaping or environmental conditions.

The Heath Zenith 5630 employs LED technology, offering a bright and energy-efficient lighting solution. The LED bulbs not only consume less electricity compared to traditional incandescent lights but also boast a longer lifespan, reducing the frequency of replacements. This makes the 5630 an eco-friendly choice, contributing to lower energy bills while ensuring sufficient illumination for outdoor areas.

Another notable characteristic of this security light is its weather-resistant design. Built to withstand various environmental conditions, the Heath Zenith 5630 features a durable housing that protects against rain, snow, and extreme temperatures. This durability ensures long-term performance and reliability, making it suitable for installation in various outdoor settings.

In addition to its motion sensor functionality, the Heath Zenith 5630 includes adjustable brightness settings. Users can select different light levels according to their preferences or the time of day. This feature allows for optimal visibility while minimizing light pollution in the surrounding area.

Installation of the Heath Zenith 5630 is straightforward, with a user-friendly mounting system that can be adapted to various surfaces. The light can be positioned to point in multiple directions, ensuring that key areas are illuminated effectively.

Overall, the Heath Zenith 5630 combines cutting-edge technology with practical features, providing an effective and economical solution for outdoor lighting and security needs. With its robust performance, energy efficiency, and adjustable settings, this motion-activated security light is an excellent choice for anyone looking to enhance safety around their property while enjoying the benefits of modern lighting technology.