Design LED 60 TriStrip | Elation Professional instruction

Design LED 60 TriStrip™

7.Power Output Jack – Use this jack to jump power to another Design LED 60 TriStrip™

8.3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female, 3-pin XLR jack.

9.3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3-pin XLR jack.

10.LED Menu Display - 4-segment menu display. Used to display the DMX address as well as all other menu functions.

11.5-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 5-pin XLR jack.

12.5-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female, 5-pin XLR jack.

13.MENU Button - This button is used to access the fixtures menu functions.

14.Up Button – The up button is used to toggle forward through the menu functions and settings.

15.Down Button – The down button is used to toggle backwards through the menu functions and settings.

16.Enter Button – The enter button is used to enter in to a certain menu function or to lock a menu setting in to memory.

17.Cooling Fans – These fans regulate the internal operating temperature of the fixture. To prevent overheating or failure be sure to never block or obstruct these fans in any way.