Timer Control

Room Air Conditioner

ELECTRONIC CONTROL PANEL

6
	B
	F	C
	F
	E
	D
	A
A	Power Control
B	Temperature/Timer Display
C	Temperature/Timer Controls
D	Mode Control
E	Fan Speed Control
F	Timer On/Off

Power Control

The Power Control turns the unit on and off.

The Temperature/Hour Display

Shows the set temperature or the timer setting. THE TEMPERATURE DISPLAY ONLY SHOWS THE SET TEMPERATURE, NOT THE ACTUAL ROOM TEMPERATURE.

Temperature/Hour Controls

These buttons are used to raise or lower the set temperature in increments of 1° from 66° to 88°. They also raise or lower the hour setting in increments of 1 from 00 to 24 when the timer is being set. In order to toggle between °F or °C, depress both of the controls at the same time.

Mode Control

The Mode Control has two settings: FAN and COOL.

The settings are adjusted with the Mode Control button. A green light indicates which setting is currently being used. When the COOL mode is selected, the unit will circulate and cool the air.

If the FAN mode is selected, the unit will only circulate the air.

Fan Speed Control

The Fan Speed Control has three

settings: High, Low and Auto. The settings are adjusted with the Fan Speed button, each time the button is depressed it changes the

setting. A green light will indicate which setting is currently being used.

When the Auto feature is selected while the air conditioner is in the COOL mode, the fan speeds will change automatically as the temperature in the room changes.

•4° or more above the set temperature the unit will be in HI FAN mode.

•4° or less above the set temperature the unit will be in LO FAN mode.

The timer can be set to either turn the unit on or off.

To turn the unit on using the Timer:

•Depress the timer key when the power is off, the display will read 00. Adjust to the desired number of hours before TURN ON using the up/down arrows.

•The display will show the time by hours left until TURN ON.

•To Turn the timer off, depress the timer key.

•A green light next to the Timer Control indicates that the timer is set.

To turn the unit OFF using the Timer:

•Depress the timer key when the power is on, the display will read 00. Adjust to the desired number of hours before TURN OFF using the up/down arrows. The display will automatically go back to the set temperature after 10 seconds.

•To display the amount of time left until TURN OFF, depress the timer button once.

•To turn the TIMER OFF, depress the timer button twice.

•A green light next to the Timer Control indicates that the timer is set.

Built-in three minute timing delay.

If this electronic unit will not respond to touch pad or remote control commands, it is necessary to unplug the unit from the electrical outlet for ﬁve seconds and then plug the unit back in.

Auto restart feature:

In the event of a power failure, this feature allows the unit to resume operation once power has been restored, retaining the most recent settings. Upon restoration of power, the timer mode may need to be reset if being utilized.

A6X05F2D specifications

The Fedders A6X05F2D is a prominent choice in the realm of air conditioning units, designed to deliver optimal cooling performance while ensuring user comfort and energy efficiency. This model is an excellent solution for residential and light commercial environments, making it a versatile addition to any climate control setup.

One of the standout features of the A6X05F2D is its impressive cooling capacity, which can effectively cool spaces of varied sizes. With the ability to provide a swift cooling effect, it is particularly well-suited for those hot summer months. The unit is designed to maintain a comfortable indoor temperature while minimizing energy consumption, making it an eco-friendly option for energy-conscious consumers.

The Fedders A6X05F2D incorporates state-of-the-art technology to enhance user convenience. The unit typically comes equipped with a programmable thermostat, allowing users to set specific temperature levels according to their preferences and schedules. This function not only maximizes comfort but also promotes energy savings, as the unit can be programmed to operate only when required.

Another noteworthy characteristic of this model is its Quiet-Mode operation. The Fedders A6X05F2D is engineered to minimize noise levels, ensuring a peaceful environment. This feature is particularly beneficial for bedrooms, study rooms, or any other setting where tranquility is essential.

Installation simplicity is yet another advantage of the A6X05F2D. Designed to fit standard window openings, it typically comes with easy-to-follow installation instructions, making it accessible for DIY enthusiasts. Additionally, its sleek design and compact footprint allow it to seamlessly integrate into various home aesthetics.

Durability is a hallmark of the Fedders brand, and the A6X05F2D is no exception. Built with high-quality materials and components, this air conditioning unit is designed to withstand prolonged use, providing reliable performance for years.

Overall, the Fedders A6X05F2D stands out in the competitive air conditioning market due to its combination of power, efficiency, and user-friendly features. Whether for cooling a single room or an entire home, it represents a solid choice for individuals seeking a dependable and efficient air conditioning solution.