Recommended Wire Sizes, Electrical Shock Hazard

Room Air Conditioner

Power Cord with Arc Detection Device

The power cord supplied with this air conditioner is equipped with an Arc Detection Device designed to shut off power to the unit when it senses an arc fault condition. An arc fault is an unintentional electrical discharge that occurs when electrical products or wires are damaged, aged, or improperly used. An arc fault can be potentially hazardous if left undetected.

WARNING

•Do not remove or modify this plug

•Do not use as an on/off switch

•Do not use outdoors

•Do not push furniture against or place furniture on the electrical cord. This can trip the test switch and/or damage the cord and become a potential condition for arcing

•Do not attempt to repair the cord. If the cord requires replacement, call an authorized servicer.

•The Arc Detection Device is not a Ground Fault Interrupter and should not be used as such

•The Arc Detection Device contains an electronic circuit board and should not be submerged or exposed to water spray

Resetting

If the Arc Detection Device has tripped, the reset button will pop up.

Follow these steps to reset the Arc Detection Device:

1.Unplug unit from electrical outlet

2.Press the reset button

3.Plug the unit back into electrical outlet

4.Check to see if power has returned to the unit

Testing

You should test the Arc Detection Device equipped power cord monthly, after every major electrical storm, or if power to your Room Air Conditioner has been interrupted.

Follow these steps to test the Arc Detection Device:

1.Unplug unit from electrical outlet

2.Press the reset button

3.Plug the unit back into electrical outlet

4.Press test button.

Unit should trip and reset button will pop up.

5.Press reset button again for use

If above test fails, stop using the air conditioner and contact customer service by calling the following toll- free number:

1-800-332-6658

or email: customerservice@fedders.com

WARNING

Do not operate this air conditioner without proper time delay circuit protection (circuit breaker or fuse). Refer to serial plate for proper power supply requirements.

Recommended Wire Sizes

(As installed per building code) :

PROTECTOR SIZEWIRE

GAUGE 15 AMP #14 MINIMUM

20 AMP #12 MINIMUM	125V	250V	250V	250V
30 AMP #10 MINIMUM	15A	20A	15A
				30A

WARNING

Electrical Shock Hazard

• Plug unit only into a grounded electrical outlet.

•Do not use an extension cord or plug adapter with this unit.

•Do not operate unit with decorative front or ﬁlter removed.

•Failure to follow these precautions could result in electrical shock, ﬁre or personal injury.

•If the air conditioner has a serial plate rating of 115 volts and greater than 7.5 amps, it must have its own fuse or circuit breaker, and no other device or unit should be operated on that fuse or circuit breaker.

•If the air conditioner has a serial plate rating of 230 volts, it must have its own fuse or circuit breaker, and no other device or unit should be operated on that fuse or circuit breaker.

•We recommend that a qualiﬁed electrician install unit in accordance with the National Electrical Code and local codes and ordinances.

•Use copper conductors of correct wire gauge and protector size only.

•Do not alter cord or plug end. Do not remove warning label on cord.

Important Grounding Requirements

•Air conditioner has a three-prong grounding plug on the power supply cord, which must be plugged into a properly grounded three-prong wall receptacle for your protection against possible shock hazard. For models up to and including 7.5 amperes, use a grounding type wall receptacle to match the cord plug.

•For models above 7.5 amperes use a single outlet grounding type wall receptacle to match the cord plug.

A6X05F2D specifications

The Fedders A6X05F2D is a prominent choice in the realm of air conditioning units, designed to deliver optimal cooling performance while ensuring user comfort and energy efficiency. This model is an excellent solution for residential and light commercial environments, making it a versatile addition to any climate control setup.

One of the standout features of the A6X05F2D is its impressive cooling capacity, which can effectively cool spaces of varied sizes. With the ability to provide a swift cooling effect, it is particularly well-suited for those hot summer months. The unit is designed to maintain a comfortable indoor temperature while minimizing energy consumption, making it an eco-friendly option for energy-conscious consumers.

The Fedders A6X05F2D incorporates state-of-the-art technology to enhance user convenience. The unit typically comes equipped with a programmable thermostat, allowing users to set specific temperature levels according to their preferences and schedules. This function not only maximizes comfort but also promotes energy savings, as the unit can be programmed to operate only when required.

Another noteworthy characteristic of this model is its Quiet-Mode operation. The Fedders A6X05F2D is engineered to minimize noise levels, ensuring a peaceful environment. This feature is particularly beneficial for bedrooms, study rooms, or any other setting where tranquility is essential.

Installation simplicity is yet another advantage of the A6X05F2D. Designed to fit standard window openings, it typically comes with easy-to-follow installation instructions, making it accessible for DIY enthusiasts. Additionally, its sleek design and compact footprint allow it to seamlessly integrate into various home aesthetics.

Durability is a hallmark of the Fedders brand, and the A6X05F2D is no exception. Built with high-quality materials and components, this air conditioning unit is designed to withstand prolonged use, providing reliable performance for years.

Overall, the Fedders A6X05F2D stands out in the competitive air conditioning market due to its combination of power, efficiency, and user-friendly features. Whether for cooling a single room or an entire home, it represents a solid choice for individuals seeking a dependable and efficient air conditioning solution.