Radio Shack TAD-1029 owner manual Connecting and Charging the Handset Battery Pack

43-789.fm Page 13 Monday, August 16, 1999 8:32 AM

CONNECTING AND CHARGING THE HANDSET BATTERY PACK

The TAD-1029 comes with a recharge- able nickel-cadmium battery pack in the handset but not connected. Before using your phone, you must connect the bat- tery pack and then charge it for about 15 hours.

1.Press down and slide off the battery compartment cover.

2.Lift the battery pack out of the com- partment, and plug its connector into the socket inside the compartment. The connector fits only one way.

3.Put the battery pack in the compart- ment and replace the cover.

4.To charge the battery pack, simply place the handset on the base. The CHARGE indicator on the base lights.

CHARGE

Indicator

Recharge the battery pack when the BATT LOW indicator on the handset flashes.

BATT LOW

Indicator

Notes:

•If the CHARGE indicator does not light when you place the handset on the base, be sure the battery pack and AC adapter are correctly and securely connected.

Also, check the charging contacts on the handset and base. If the con- tacts are dirty or tarnished, clean them with a pencil eraser.

13