![](/images/new-backgrounds/1309945/30994545x1.webp)
Using the Handset
1.Press REMOTE. The REMOTE indi- cator lights and
REMOTE Indicator
2.Press CHANGE () then ANNC (0). The handset beeps once.
3.Speak your message in a normal voice, as though you were talking to someone on the phone.
4.Press STOP (5) when you finish the message. The TAD plays back the outgoing message, then beeps twice.
5.Press REMOTE. The REMOTE indi- cator turns off.
To play the outgoing message at any time, press REMOTE then ANNC.
Using the Base
1.Hold down ANNC. After 3 seconds the TAD beeps and
2.Release ANNC when you finish the message. PL (play) appears and the TAD automatically plays back the message.
To play the outgoing message at any time, press ANNC. PL appears while the message plays.
Deleting an Outgoing Message
To delete your outgoing message and use the prerecorded message, press DELETE then ANNC on the base, or RE- MOTE, DELETE (9), then ANNC on the handset.
23