43-789.fm Page 9 Monday, August 16, 1999 8:32 AM
2.Plug one end of the supplied short modular cord into the telephone jack on the back of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC 12V jack on the back of the base.
4.Route the modular cord through ei- ther groove on the right bottom of the base and the adapter cord through the groove below the strain relief slot.
Strain
Relief
Slot
5.Route the end of the modular cord through the hole in the bracket, and insert the tabs on the narrow end of
the bracket into the inner pair of slots near the top of the base as shown.
6.Snap the tabs at the wide end of the bracket into place.
7.Plug the modular cord into the wall plate jack. Align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
9
